Product Specifications
- Manufacturer
- Flowline
- Model Number
- LV41
- Type
- Float Level Switch
- Contact
- SPDT, 10 (8) A @ 250 VAC
- Process Temp
- 0 to 50 °C (32 to 122 °F)
- Pressure
- 1 bar (14.5 psi)
- Protection
- NEMA 6 (IP68)
- Material
- Polypropylene body, PVC cable
- Documents
- Product Manual, Product Specs
Product Description
The Flowline LV41 is a mechanical float level switch for start and stop of pumps, valves and other electrical loads in tanks and reservoirs. A sealed float rides the liquid surface and tilts a SPDT dry contact as the level rises or falls; the switch needs no supply of its own and the contact wires straight to a PLC, a controller or a SCADA input.
The contact is rated 10 (8) A at 250 VAC. Wiring selects the normally open or normally closed state; one model covers both fill and drain logic. Because the contact is dry and mechanically driven, it carries the pump starter coil or a controller input rather than the motor current itself.
The body is polypropylene and the cable jacket is PVC, which suits corrosive liquids and allows submersion. Process temperature is 0 to 50 °C, pressure is 1 bar, and the sensor carries NEMA 6 (IP68). The housing weighs 1.1 kg; the side profile is 41.5 mm and the top view measures 81.0 mm by 105.0 mm, with an overall length of 139.7 mm.
Ordering code LV41-7 is completed by the cable length: 20 for 20 ft and 50 for 50 ft. A counterweight LV49-7000 and a cable hanger LV49-9000 hold the switch at the required level in a wet well. Compliance is CE.
Flowline LV41 Float Level Switch for Pump Control, SPDT 10 A IP68
Product Specifications
- Manufacturer
- Flowline
- Model Number
- LV41
- Type
- Float Level Switch
- Contact
- SPDT, 10 (8) A @ 250 VAC
- Process Temp
- 0 to 50 °C (32 to 122 °F)
- Pressure
- 1 bar (14.5 psi)
- Protection
- NEMA 6 (IP68)
- Material
- Polypropylene body, PVC cable
- Documents
- Product Manual, Product Specs















