Product Specifications
- Brand
- Siemens
- Part Number
- 4AM6542-5AD40-0FA0
- Type
- Single-Phase Control / Isolating Transformer
- Series
- SITAS
- Rated Power
- 2,500 VA (S6: 13,300 VA)
- Primary Voltage
- 400 V AC ±5% (380 / 400 / 420 V taps)
- Secondary Voltage
- 2 × 115 V AC (series 230 V, parallel 115 V)
- Secondary Current
- 10.9 A per winding (21.8 A parallel)
- Efficiency
- 96%
- Short-Circuit Voltage
- 1.76%
- Frequency
- 50 / 60 Hz
- Insulation Class
- B (130°C), 40°C ambient
- Protection Rating
- IP00
- Iron Core
- EI 192/110
- Dimensions (W×H×D)
- 194 × 180 × 178 mm
- Standards
- EN 61558-2-1, -2-2, -2-4; CE, cRUus
Product Description
2500 VA continuous, 13300 VA for a short interval, and two 115 V windings that can be joined either way. The 4AM6542-5AD40-0FA0 is a single-phase control transformer for a control circuit served by one transformer. The short-time figure is S6 duty. It covers the inrush when a large group of contactors picks up at once, and it is not a number that can be held. Steady load belongs at 2500 VA.
Series or parallel changes the current, not the power
Wire the two 115 V windings in series and the output is 230 V at 10.9 A. Wire them in parallel and the output is 115 V at 21.8 A. The total remains 2500 VA either way, so a control circuit built for the wrong voltage gets the right reading on one meter and half the available current on another. Short-circuit voltage is 1.76%, which is the amount the secondary sags under a downstream fault and the figure that decides whether a contactor drops out cleanly or chatters. The EI 192/110 core is rated at 96% efficiency on a 50 or 60 Hz supply, and it belongs with the continuous rating rather than the short-time one: the loss it implies is what the enclosure sheds hour after hour, while the 13300 VA interval lasts only long enough to close a set of contactors. A weight figure is not published for this order code, so the mounting structure cannot be sized from the model name alone.
The IP00 frame measures 194 by 180 by 178 mm and goes inside a larger enclosure. CE and cRUus markings apply, the latter covering recognition under UL and CSA. The applicable standards are EN 61558-2-1, -2-2 and -2-4. Two orders with the same case and terminals can still differ at the secondary, and that is set when the order is placed.
Related Products
- Siemens 4AM4042-8EN00-0EA0 — 250 VA SITAS Safety Transformer, 24 V SELV Output, 12-Tap Primary up to 600 V
- Siemens 4AM3242-4TT10-0FA0 — 1:1 Galvanic Isolation, 63VA
- Siemens 4AM6542-8ED40-0FA0 — Three-tap primary covers 525–575 V mains with one unit
Resources & Documentation
Siemens 4AM6542-5AD40 SITAS Control Transformer, 2500VA 400V±5% Primary, 2×115V Secondary
Product Specifications
- Brand
- Siemens
- Part Number
- 4AM6542-5AD40-0FA0
- Type
- Single-Phase Control / Isolating Transformer
- Series
- SITAS
- Rated Power
- 2,500 VA (S6: 13,300 VA)
- Primary Voltage
- 400 V AC ±5% (380 / 400 / 420 V taps)
- Secondary Voltage
- 2 × 115 V AC (series 230 V, parallel 115 V)
- Secondary Current
- 10.9 A per winding (21.8 A parallel)
- Efficiency
- 96%
- Short-Circuit Voltage
- 1.76%
- Frequency
- 50 / 60 Hz
- Insulation Class
- B (130°C), 40°C ambient
- Protection Rating
- IP00
- Iron Core
- EI 192/110
- Dimensions (W×H×D)
- 194 × 180 × 178 mm
- Standards
- EN 61558-2-1, -2-2, -2-4; CE, cRUus







