



Product Specifications
- Brand
- Di Nicola Infinam
- Part Number
- GVMS
- Type
- Wedge Gate Valve
- Series
- GVMS
- Body Material
- Cast Carbon Steel ASTM A216 WCB
- Nominal Diameter
- DN40 to DN1600
- Pressure Rating
- 2.5 to 100 bar (Class 125 to 900 PSI)
- Temperature Range
- -10°C to +200°C
- Actuation
- Handwheel, Pneumatic, Electric, Hydraulic
- Standards
- API 600, ASME B16.34, API 598
Product Description
The GVMS is an API 600 wedge gate valve built in cast carbon steel (ASTM A216 WCB / GP 240GH+N) with body wall thicknesses that exceed code minimums — a design choice visible in the generous fillet radii at flange-to-body transitions and stress concentration zones. It covers DN40 through DN1600 in pressure classes from 125 to 900 PSI, making it one of the broadest single-series gate valve ranges from an Italian manufacturer founded in 1928.
How does the body design change with pressure class?
Di Nicola Infinam varies the GVMS body cross-section by pressure class to optimize stress distribution. Class 150 bodies use an oval center section to resist irregular deformation. Class 300 transitions to an oval section near the seats with a wider circular body elsewhere. Higher classes adopt a fully circular cross-section. This graduated approach puts material only where stress demands it, avoiding unnecessary weight while maintaining the safety factor.
Which actuation type suits which application?
Handwheel actuation with rising stem gives operators direct visual position indication — the stem height tells you if the valve is open or closed without a position sensor. Pneumatic actuators suit hazardous-area isolation where electric power is restricted. Electric actuation integrates with DCS and SCADA systems for remote pipeline control. Hydraulic actuation handles the largest DN sizes where actuation forces exceed practical pneumatic cylinder diameters.
What media and industries does the GVMS serve?
The GVMS handles water, oil, gas, steam, chemical products, and slurries across process industry, petroleum, hydroelectric, aqueduct, and cryogenic service. Flanged connections follow ASME B16.5 / EN 1092-1 / ISO 7005. Butt weld ends per ASME B16.25 are also available. Face-to-face dimensions conform to DIN 3202 / EN 558-1 / ANSI B16.10.
Resources & Documentation
Di Nicola Infinam GVMS API 600 Cast Steel Wedge Gate Valve — Handwheel, Pneumatic, Electric
Product Specifications
- Brand
- Di Nicola Infinam
- Part Number
- GVMS
- Type
- Wedge Gate Valve
- Series
- GVMS
- Body Material
- Cast Carbon Steel ASTM A216 WCB
- Nominal Diameter
- DN40 to DN1600
- Pressure Rating
- 2.5 to 100 bar (Class 125 to 900 PSI)
- Temperature Range
- -10°C to +200°C
- Actuation
- Handwheel, Pneumatic, Electric, Hydraulic
- Standards
- API 600, ASME B16.34, API 598


