Flat-field galvo marking is a bargain with physics: the lens focuses sharply across a plane, and everything off that plane blurs. Curved workpieces break the bargain — which is why two remedies exist. The rotary attachment brings the curve to the plane: it rotates a cylinder under the flat field so each slice of the surface passes through focus. The 3D galvo head instead moves focus itself, tracking the surface's height as the beam sweeps. Choosing between them is choosing how the curve should be handled.
The rotary attachment: honest and proven
A rotary chuck rotates the workpiece about its axis while the galvo scans one focused slice at a time. Text around a bottle, rings, shafts, roll engraving — any rotationally symmetric part is native territory. Accuracy depends on the mechanical rotation, so diameter consistency matters, and non-cylindrical curves (a tapering bottle neck) need software compensation. It is affordable, precise for its class, and the industry default for cylinders.
The 3D galvo: focus that follows the curve
A 3-axis galvo head shifts its focus plane dynamically — the beam dives and climbs with the surface within the head's working volume. That handles non-rotationally-symmetric curves: domes, sculpted surfaces, parts that curve in both directions. Marking a logo on a curved car trim, or text on a molded housing with draft angles, is 3D-galvo territory because no rotation axis exists to exploit. The costs are head price, a larger calibrated volume to maintain, and more demanding integration into the machine controller.
The decision rule
Rotationally symmetric parts: rotary — cheaper, proven, precise. Freeform curves without an axis to rotate about: 3D galvo. High-mix shops that meet both buy both; the sources behind them are identical, so the decision is purely about how each curve reaches focus.
Can a 3D galvo replace the rotary entirely?
For cylinders it works, but it pays a precision tax — the head tracks the curve optically while the rotary holds it mechanically. For round-part production, the rotary's mechanical simplicity still wins; 3D earns its keep on the parts rotation cannot serve.
Which one needs more calibration?
The 3D head: its 3D field map must be maintained, and lens changes recalibrated. The rotary's calibration is a chuck runout check. Budget maintenance time accordingly.


