Why mount a separate fuse holder, wire it to a terminal, and take up twice the space? The 8WH2000‑1MG08 consolidates a 5×20 mm cartridge fuse and a direct spring‑loaded connection into a single 8 mm‑wide block. It clips onto the same 35 mm DIN rail as your other 8WH terminals and handles solid, stranded, and fine‑stranded conductors from 0.08 mm² up to 4.0 mm². The fuse snaps out from the top, so you do not need to disconnect a single wire to check or replace it.

Spring‑Loaded Reliability

• Vibration‑proof: the spring clamp exerts constant contact force on the wire, tested against railway and marine vibration standards.
• Tool‑free wiring: solid conductors up to 2.5 mm² push straight in; stranded wires with ferrules insert with minimal force.
• Gas‑tight contact keeps the connection point free of corrosion.