Product Specifications
- Brand
- Siemens
- Part Number
- 4AM6442-4TT10-0FA0
- Product Type
- Control / Isolation Transformer (1:1)
- Series
- SITAS 4AM6442
- Rated Power
- 2,000 VA (S6: 9,700 VA)
- Primary Voltage
- 230 V (taps: 218/230/242 V)
- Secondary Voltage
- 230 V
- Secondary Current
- 8.70 A
- Frequency
- 50/60 Hz
- Efficiency
- about 96%
- Protection Class
- IP00
- Net Weight
- 20.487 kg
- Mounting
- Screw Mount
Product Description
A 230 V primary with 218, 230 and 242 V taps, a 230 V secondary, and 8.70 A at the output. The 4AM6442-4TT10-0FA0 is a 2000 VA single-phase control transformer built for control circuits that take their supply from one 230 V source and feed a separate 230 V load. The taps absorb a supply that runs several percent high or low without an external autotransformer.
The 9700 VA figure is a short-time rating
Continuous power is 2000 VA. Short-time S6 power is 9700 VA. That is a duty type, not a continuous output figure. When a group of contactors picks up together the current spike is absorbed by the 9700 VA capacity; steady load must stay at or below 2000 VA. Run it above the continuous figure and the temperature margin built into the class B insulation at 40 °C ambient is consumed. The maker publishes 96% efficiency for the EI 174/102 laminated core, which puts the loss around 83 W. That heat goes into the enclosure, and it belongs in the panel thermal budget alongside the losses of every other device mounted in the same cabinet, which is why the 96% figure matters more here than it would on an open frame unit mounted in free air with unrestricted convection on every side. Net weight is 20.487 kg. The 25 kg figure sometimes quoted includes packaging, so size the mounting points to the net figure and allow the larger one for transport. Screw terminals sit on a screw-mount chassis, and the IP00 frame goes inside a cabinet. The three primary taps cover a supply that sits away from nominal, which is the usual case on a plant distribution board rather than the exception.
Resources & Documentation
Siemens 4AM6442-4TT10 2000 VA 1:1 Control Transformer, 230 V, 8.70 A
Product Specifications
- Brand
- Siemens
- Part Number
- 4AM6442-4TT10-0FA0
- Product Type
- Control / Isolation Transformer (1:1)
- Series
- SITAS 4AM6442
- Rated Power
- 2,000 VA (S6: 9,700 VA)
- Primary Voltage
- 230 V (taps: 218/230/242 V)
- Secondary Voltage
- 230 V
- Secondary Current
- 8.70 A
- Frequency
- 50/60 Hz
- Efficiency
- about 96%
- Protection Class
- IP00
- Net Weight
- 20.487 kg
- Mounting
- Screw Mount







