Product Specifications
- Brand
- DOSATRONIC GmbH
- Part Number
- DCW 120
- Type
- Water Quality Controller
- Measured Parameters
- Conductivity, pH, ORP, free/total chlorine, chlorine dioxide, ozone, oxygen, turbidity, temperature
- Display
- Graphic backlit LCD, all values simultaneously visible
- Signal Input
- 4–20 mA and 12/24 V galvanically isolated; ±2000 mV for potentiometric and amperometric sensors
- Analog Outputs
- 2× 0/4–20 mA (measured value or control variable)
- Relays
- 1× dosing pump (230 VAC, pulse or cycle), 1× control (P, PI, PID), 1× alarm
- Communication
- Optional RS485 Modbus RTU
- Power Supply
- 90–240 VAC ±10%, 50/60 Hz
- Enclosure
- IP65 ABS, 229 × 204 × 116 mm, wall-mount
Product Description
The DOSAControl DCW 120 is a single-channel programmable measuring and control unit from DOSATRONIC GmbH for industrial water treatment and chemical dosing. Housed in an IP65-rated ABS wall-mount enclosure, it accepts inputs from conductivity cells, pH electrodes, ORP sensors, and amperometric chlorine/ozone/oxygen sensors, displaying all measured values simultaneously on a graphic backlit LCD with customizable screen layout.
What control modes does the DCW 120 offer?
The controller provides three dedicated relays: one for a dosing pump with pulse or cycle mode at 230 VAC, one configurable control relay supporting P, PI, or PID algorithm, and one alarm relay with front-panel alarm indication. Two galvanically isolated 0/4–20 mA analog outputs transmit either the measured value or the control variable to external PLCs, chart recorders, or SCADA systems. A hold/auto function freezes output values during sensor maintenance without triggering false alarms.
Can the DCW 120 integrate with a plant-wide control network?
An optional RS485 serial interface with Modbus RTU protocol allows the DCW 120 to communicate with higher-level control systems for remote setpoint adjustment, measured value polling, and alarm monitoring. Data is stored in non-volatile memory, preserving all configuration and calibration settings through power interruptions. The controller also supports a PNP inductive proximity switch input for flow monitoring, ensuring dosing only occurs when sample flow is present.
What sensors and accessories are compatible?
DOSATRONIC offers matched accessories including the DOSAFlow DF20H flow cell for two electrodes and the DF11H for one electrode plus one amperometric sensor. A DOSASens VF/80 5-inch washable 80 μm filter protects sensors from particulate fouling. The DCW 120 ships with a 5-meter standard connection cable pre-wired to the controller.
Resources & Documentation
DOSATRONIC DCW 120 Water Quality Controller with Graphic LCD and Multi-Parameter Sensing
Product Specifications
- Brand
- DOSATRONIC GmbH
- Part Number
- DCW 120
- Type
- Water Quality Controller
- Measured Parameters
- Conductivity, pH, ORP, free/total chlorine, chlorine dioxide, ozone, oxygen, turbidity, temperature
- Display
- Graphic backlit LCD, all values simultaneously visible
- Signal Input
- 4–20 mA and 12/24 V galvanically isolated; ±2000 mV for potentiometric and amperometric sensors
- Analog Outputs
- 2× 0/4–20 mA (measured value or control variable)
- Relays
- 1× dosing pump (230 VAC, pulse or cycle), 1× control (P, PI, PID), 1× alarm
- Communication
- Optional RS485 Modbus RTU
- Power Supply
- 90–240 VAC ±10%, 50/60 Hz
- Enclosure
- IP65 ABS, 229 × 204 × 116 mm, wall-mount





