12 month warranty Request a Quote Technical Support
Sign In

Product Specifications

Product Description

In a portable analyser or a gas sampling probe, regulator weight matters as much as the battery and the pump. The PRDB is a single-stage diaphragm regulator that weighs about 25 g in brass and still holds 0 to 50 psig from a 500 psig source.

A piston regulator seals with an O-ring on a sliding piston, and that seal has breakaway friction; at low outlet pressure the friction appears as dead band, because the knob moves and nothing happens until the seal breaks free, while a diaphragm regulator has no sliding seal at all, and its diaphragm senses outlet pressure directly against the spring, so it holds setpoint at the low flows and low differentials that analytical instruments work at.

There is no sliding seal.

The body is brass with 303 and 316 stainless wetted parts. Inlet and outlet are 10-32 internal threads, the orifice is 0.89 mm, and the unit is non-relieving.

Panel-mount and high-resolution cap versions are ordered as part of the model code, and the 2 inch cap adds roughly 50 to 60 g. Two conditions apply at installation: the inlet must be steady at 500 psig or below, and a filter ahead of the port keeps the seat clean.

The valve does not vent to atmosphere. A pulsing load will show on the gauge.

Resources & Documentation

Beswick Engineering
Compare

Beswick PRDB Ultraminiature Diaphragm Regulator, 500 psig Inlet, 25 g

Brass, 10-32 ports, 25 g
MPN/Series: PRDB-.N

Product Specifications

Brand
Beswick Engineering Co., Inc.
Part Number
PRDB-.N (PRDB series)
Type
Single-Stage Ultraminiature Diaphragm Regulator
Body Material
Brass; 303 and 316 stainless steel wetted parts
Max Inlet Pressure
500 psig (steady inlet)
Outlet Range
0 to 50 psig
Orifice
0.89 mm
Ports
10-32 internal threads, inlet and outlet
Weight
Approximately 25 g in brass
Function
Non-relieving, panel-mount versions available

Resources & Documentation

Beswick PRDB Ultraminiature Diaphragm Regulator, 500 psig Inlet, 25 g
×