Product Specifications
- Brand
- Kobold
- Series
- DVZ
- Type
- Inline vortex flow meter
- Flow Range
- 0.13 to 1.2 GPM up to 2.7 to 26 GPM, size dependent
- Accuracy
- ±2.5% of full scale
- Repeatability
- ±1% of full scale
- Body Material
- PPS
- Connection Material
- Nickel-plated brass or 316 stainless steel
- Temperature Range
- 0 to 80 °C
- Pressure Range
- Up to 10 bar
- Straight Run
- 10D upstream, 2D downstream
- Output Options
- Analog, frequency, switch, display with batch and totaliser
Product Description
The Kobold DVZ is an inline vortex flow meter. Flow past a bluff body sheds vortices, and the frequency of that shedding is proportional to velocity, and the meter derives flow from a frequency without any moving part in the stream. That is the reason it suits dirty or aggressive media that would jam a paddlewheel.
The range depends on the size ordered, starting at 0.13 to 1.2 GPM on the smallest body and reaching 2.7 to 26 GPM on the largest, with accuracy ±2.5% of full scale and repeatability ±1% of full scale. Because the specification is a percentage of full scale rather than of reading, the meter should be sized so normal flow sits in the upper half of the range.
Body material is PPS, a dimensionally stable thermoplastic, with nickel-plated brass or 316 stainless steel for the process connections. The meter is rated 0 to 80 °C and 10 bar, which covers chilled water, hot water and light chemical service, and the electronics options cover analog output, frequency output, a switch output and a version with local display, batch and totaliser functions.
Installation needs a straight run of about 10 pipe diameters upstream and 2 diameters downstream, with the meter flooded and the pipe free of air pockets. Below the minimum Reynolds number the vortex street does not form reliably, which makes the low end of each range a boundary rather than a measuring point.
Kobold DVZ Inline Vortex Flow Meter, 0.13 to 26 GPM, PPS Body
Product Specifications
- Brand
- Kobold
- Series
- DVZ
- Type
- Inline vortex flow meter
- Flow Range
- 0.13 to 1.2 GPM up to 2.7 to 26 GPM, size dependent
- Accuracy
- ±2.5% of full scale
- Repeatability
- ±1% of full scale
- Body Material
- PPS
- Connection Material
- Nickel-plated brass or 316 stainless steel
- Temperature Range
- 0 to 80 °C
- Pressure Range
- Up to 10 bar
- Straight Run
- 10D upstream, 2D downstream
- Output Options
- Analog, frequency, switch, display with batch and totaliser















