The 6SL3230-3YE52-0CF0 is the standard-entry 200 kW SINAMICS G120X in FSG frame: C3 EMC, standard coating, no IOP-2 operator panel. At 500 A output, it is the penultimate power step in the G120X range — one step below the 250 kW flagship, and a substantial drive in its own right for water-treatment pumps, district-heating circulators, and industrial cooling-tower fans.

C3 EMC with standard coating — the baseline 200 kW configuration

The C3 classification is the default for industrial power distribution: the drive connects to a dedicated industrial transformer and does not share a low-voltage network with residential or commercial loads. The integrated C3 filter handles the drive's switching-frequency harmonics without external filter modules. Standard coating (no 3C3 conformal coating) is appropriate for indoor electrical rooms and drive cabinets where humidity and corrosive gases are controlled by the building's HVAC — the most common installation environment for a drive of this size.

200 kW in the FSG platform

The FSG frame accommodates both the 200 kW and 250 kW G120X power stages — the same physical form factor, different internal power electronics. At 500 A, the 200 kW variant drives the largest single-motor loads in most industrial utility applications: a main condenser-water pump, a cooling-tower fan array, or a wastewater lift station pump. The 150% overload for 57 seconds provides the torque reserve to start high-inertia fan rotors and to ride through brief load surges without tripping.