Your line still runs PROFIBUS DP, and replacing or adding a 22 kW drive on a 240 V supply should not mean re-cabling to a new network. The 6SL3230-3YC32-0UP0 drops onto the existing DP segment at 108 A with no step-up transformer, in the FSE cabinet frame (275×551×239 mm) — a direct swap for an aging MM4 or G110.

It carries no DC terminals, so there is no provision for an external du/dt filter or brake resistor. For a 22 kW pump or fan with a short motor cable and no high-inertia stop, that is all you need. If the cable run is long or the load must decelerate under its own inertia, the 1UP0 sibling adds those terminals; choose it only when the duty cycle requires it.