Product Specifications
- Brand
- Analog Systems (SH) Co., Ltd.
- Part Number
- ASP2000
- Type
- WirelessHART Wireless Pressure and Temperature Transmitter
- Protocol
- IEC 62591 WirelessHART, GB/T 29910.5-2013
- Output
- analog and WirelessHART, integrated temperature sensor
- Power Supply
- 3.6 V lithium battery, over 10 years at 1-minute refresh
- Wireless
- 2.4 GHz, update 1 s to 60 min, 150 m open area
- Environment
- process temperature -25 to +60 deg C
Product Description
Remote wells, isolated exchangers, rotating equipment and storage farms share one problem: the measurement is valuable, but the cable run to power it is not. The Analog Systems ASP2000 removes the wiring question entirely - a WirelessHART transmitter conforming to IEC 62591 that runs from a 3.6 V lithium battery for more than a decade at typical one-minute refresh rates.
What makes a decade of battery credible?
Low-power design on both sides of the radio: the transducer, the HART stack and the RF stage are developed in-house for energy budget rather than adapted from wired products, and the update frequency itself is selectable from one second to sixty minutes - so a slow process buys battery life with reporting rate. The 2.4 GHz link reaches 150 m in open area, and pressure plus temperature travel in the same wireless message, halving the number of field devices a site must install and maintain.
Where does wireless beat wired outright?
Wherever the hazard or the distance makes cable work expensive or risky: oil and gas automation, heat exchange stations, boiler and pipeline monitoring, tank storage - the operator walks less, and nobody has to enter a hazardous atmosphere to read a gauge. For sites that already run a WirelessHART gateway, the ASP2000 joins the network as one more node; for new sites, it is the cheapest way to start one.
Analog Systems ASP2000 WirelessHART Pressure Transmitter with 10-Year Battery
Product Specifications
- Brand
- Analog Systems (SH) Co., Ltd.
- Part Number
- ASP2000
- Type
- WirelessHART Wireless Pressure and Temperature Transmitter
- Protocol
- IEC 62591 WirelessHART, GB/T 29910.5-2013
- Output
- analog and WirelessHART, integrated temperature sensor
- Power Supply
- 3.6 V lithium battery, over 10 years at 1-minute refresh
- Wireless
- 2.4 GHz, update 1 s to 60 min, 150 m open area
- Environment
- process temperature -25 to +60 deg C







