Product Specifications
- Brand
- Siemens
- Part Number
- 6ES7145-6HD00-0AB0
- Product Type
- Analog Output Module
- Series
- SIMATIC ET 200eco PN
- Analog Outputs
- 4 (configurable U/I)
- Output Ranges
- 0–10 V, ±10 V, 1–5 V / 0–20 mA, ±20 mA, 4–20 mA
- Resolution
- 16-bit (15 bits + sign)
- Supply Voltage
- 24 V DC
- IP Rating
- IP65/IP66/IP67
- Operating Temperature
- -40 °C to +60 °C
- Dimensions (WxHxD)
- 60 x 175 x 49 mm
Product Description
What makes the 4AQ different from the ET 200eco analog input modules?
Unlike the 8AI modules in the same family, the 4AQ generates analog output signals — it drives field devices (control valves, variable-speed drives, I/P converters) rather than reading sensors. Each of the 4 channels is independently configurable for voltage (0–10 V, ±10 V, 1–5 V) or current (0–20 mA, ±20 mA, 4–20 mA) with 16-bit resolution.
When would you place analog outputs in the field instead of the control cabinet?
Long analog cable runs between the cabinet and the actuator pick up noise and add installation cost. Mounting the 4AQ directly on the machine near the actuators keeps signal paths short — the only cable back to the controller is the PROFINET network cable. The integrated 2-port switch with IRT support means you can daisy-chain through multiple eco PN modules without extra switches.
Installation considerations
The zinc die-cast housing is fully encapsulated and rated IP65/IP66/IP67 — no control cabinet needed. Each M12 connector carries one analog output. Voltage outputs are short-circuit protected (30 mA max); current outputs tolerate open-circuit conditions up to 20 V. Load impedance: 1 kΩ minimum for voltage outputs, 600 Ω maximum for current outputs. Phase-out started 01.10.2024 — the ET 200eco PN M12-L series is the designated successor.
Siemens 6ES7145-6HD00-0AB0 ET 200eco PN Analog Output Module with 4 AO U/I, M12 IP67
Product Specifications
- Brand
- Siemens
- Part Number
- 6ES7145-6HD00-0AB0
- Product Type
- Analog Output Module
- Series
- SIMATIC ET 200eco PN
- Analog Outputs
- 4 (configurable U/I)
- Output Ranges
- 0–10 V, ±10 V, 1–5 V / 0–20 mA, ±20 mA, 4–20 mA
- Resolution
- 16-bit (15 bits + sign)
- Supply Voltage
- 24 V DC
- IP Rating
- IP65/IP66/IP67
- Operating Temperature
- -40 °C to +60 °C
- Dimensions (WxHxD)
- 60 x 175 x 49 mm









