Product Specifications
- Brand
- Siemens
- Part Number
- 6SL3520-0XD00-3AB0
- Product Type
- Wall-Mounted Distributed Drive
- Series
- SINAMICS G115D
- Rated Power
- 0.37 kW
- Supply Voltage
- 380–480 V 3-Phase
- Rated Output Current
- 1.3 A
- Overload Current
- 2.6 A (200% for 3 s)
- Communication
- Standard I/O
- Frame Size
- FSA
- Protection Rating
- IP65 / IP66 / UL Type 4X
Product Description
The Siemens 6SL3520-0XD00-3AB0 is the 0.37 kW standard I/O variant of the SINAMICS G115D wall-mounted distributed drive family in the 0XD connector configuration — the smallest power rating in the G115D range. With 1.3 A rated output (High Overload) and a 380–480 V 3-phase supply, it targets mini conveyor sections where the control architecture uses relays, a basic PLC without fieldbus, or manual pushbutton stations.
When is this variant the right choice?
The standard I/O variant suits applications where the control system does not have — or does not need — a PROFINET network. Four programmable PNP digital inputs accept fixed-speed selection, jog, enable, and direction commands via 24 V DC signals. Commissioning is via Mini-USB with TIA Portal Startdrive or SD card. The 0XD connector configuration determines the physical wiring interface while all electrical ratings remain identical to other G115D models at 0.37 kW. For applications that may eventually need networked control, consider the AF0 (PROFINET) variant — it can still accept digital input commands as a fallback.
What motor types are supported?
The drive supports IE3 asynchronous motors, IE4 synchronous reluctance motors, and SIMOGEAR geared motor combinations up to 0.37 kW. Control modes: V/f, V/f with FCC, sensorless vector control. Output frequency: 0–550 Hz (V/f), 0–240 Hz (vector). Overload: 200% (2.6 A) for 3 seconds. Integrated 180 V DC brake control. FSA frame: 380 × 156 × 129 mm, natural convection, IP66 / UL Type 4X.
Frequently Asked Questions
How does 0.37 kW AB0 differ from AA0?
Both are non-fieldbus variants with identical electrical ratings (1.3 A). The AB0 uses a standard I/O connector configuration that differs from the AA0 I/O Control variant. The choice depends on which connector type matches your field wiring standard. Functionally they are equivalent — same I/O count, same control modes, same commissioning tools.
Is 0.37 kW adequate for anything beyond the lightest conveyors?
At 1.3 A continuous output, this variant is specifically for the lightest sections — typically a single short belt, a diverter wheel, or a gate. If the section handles variable package weights, starts under load, or runs at high duty cycle, the 0.55 kW (1.7 A) variant provides meaningful thermal headroom in the identical FSA mechanical package (380 × 156 × 129 mm) for a modest cost increment.
Related Products
Resources & Documentation
Siemens 6SL3520-0XD00-3AB0 | SINAMICS G115D Distributed Drive, 0.37 kW, FSA
Product Specifications
- Brand
- Siemens
- Part Number
- 6SL3520-0XD00-3AB0
- Product Type
- Wall-Mounted Distributed Drive
- Series
- SINAMICS G115D
- Rated Power
- 0.37 kW
- Supply Voltage
- 380–480 V 3-Phase
- Rated Output Current
- 1.3 A
- Overload Current
- 2.6 A (200% for 3 s)
- Communication
- Standard I/O
- Frame Size
- FSA
- Protection Rating
- IP65 / IP66 / UL Type 4X












