Product Specifications
- Manufacturer
- MATE TECHNOLOGY SHENZHEN LIMITED
- Model
- MKF-JS26
- Series
- H38
- Product Type
- Two-axis Hall effect joystick, panel mount
- Axes
- 2
- Button
- 1 momentary push button, self-returning
- Operation Angle
- XY plus or minus 20 degrees; diagonal plus or minus 28 degrees
- Return Accuracy
- Below 0.8 percent
- Mechanical Life
- 5 million cycles; button 1 million operations
- Supply
- 5 VDC standard; 12 to 24 VDC optional
- Output
- 0-5 V, or 0.5-4.5 V on request; RS232, RS485, USB, CAN
- Handle Material
- Aluminium alloy
- Operating Temperature
- -40 to 70 degrees Celsius
- Storage Temperature
- -50 to 80 degrees Celsius
- Protection
- IP65 above the panel
Product Description
The MATE MKF-JS26 is a two-axis Hall effect joystick from the H38 series, fitted with one momentary push button that returns to centre, and because it is a panel-mount control and not a complete control panel, the machine builder supplies the housing and the wiring around the grip and the button. Hall sensing keeps the magnet clear of the sensor, which is what carries the mechanism past five million cycles.
Travel is plus or minus 20 degrees on each axis and plus or minus 28 degrees on the diagonal. The handle is aluminium and the stick springs back to neutral, with return accuracy quoted below 0.8 percent. Mechanical life is five million cycles. The button is rated one million operations. The unit runs from -40 to 70 degrees Celsius, stores from -50 to 80, and carries IP65 above the panel only.
Supply is 5 VDC as standard. A 12 to 24 VDC option exists, and the two are not interchangeable on the same unit. Output is 0 to 5 V, or 0.5 to 4.5 V on request, alongside RS232, RS485, USB and CAN. Which interface is fitted is fixed at order; the connector and the protocol have to be specified together rather than added later.
The IP65 rating stops at the panel face. The body below the panel sits inside the cabinet and needs its own protection against dust and washdown, and the mounting cutout has to be sealed if the panel is cleaned with a hose. The 0.8 percent figure is return accuracy to neutral, not linearity across the stroke. Any proportional valve or drive mapped to the analog output has to be scaled after the unit is installed, because centre voltage and end-point voltage follow the supply and the output option chosen in the field.
Resources & Documentation
MATE MKF-JS26 2-Axis Hall Joystick, 1 Button, IP65, CAN and RS485
Product Specifications
- Manufacturer
- MATE TECHNOLOGY SHENZHEN LIMITED
- Model
- MKF-JS26
- Series
- H38
- Product Type
- Two-axis Hall effect joystick, panel mount
- Axes
- 2
- Button
- 1 momentary push button, self-returning
- Operation Angle
- XY plus or minus 20 degrees; diagonal plus or minus 28 degrees
- Return Accuracy
- Below 0.8 percent
- Mechanical Life
- 5 million cycles; button 1 million operations
- Supply
- 5 VDC standard; 12 to 24 VDC optional
- Output
- 0-5 V, or 0.5-4.5 V on request; RS232, RS485, USB, CAN
- Handle Material
- Aluminium alloy
- Operating Temperature
- -40 to 70 degrees Celsius
- Storage Temperature
- -50 to 80 degrees Celsius
- Protection
- IP65 above the panel





