

Product Specifications
- Manufacturer
- Badger Meter
- Product Number
- 220 Series
- Category
- Insertion Flow Sensors
- Flow Velocity Range
- 0.5 to 30 ft/sec (recommended)
- Accuracy
- ±1.0% FS (0.5-30 ft/sec)
- Temperature
- Up to 285°F (141°C) continuous, 305°F (150°C) peak
- Materials
- Brass (220BR), 316SS (220SS), PVDF (220PVS)
- Documents
- Product Manual, Product Specs (3 Files)
Product Description
The Badger Meter Series 220 flow sensors utilize a unique six-bladed, forward-swept impeller design with a proprietary non-magnetic sensing mechanism. This design provides higher, more consistent torque and is less prone to fouling by waterborne debris. The absence of magnetic drag, combined with the impeller shape, improves operation and repeatability at lower flow rates, especially in pipes with metallic or rust particles .
As liquid flow turns the impeller, a low-impedance square wave signal is transmitted with a frequency proportional to the flow rate. This signal can travel up to 2000 feet without amplification. All sensors (except irrigation versions) are supplied with 20 feet of shielded cable. When properly installed with 10 diameters upstream and 5 downstream of straight pipe, an accuracy of ±1.0% of full scale can be achieved over the recommended flow range of 0.5 to 30 feet/second .
The series offers three main material options: 220BR (brass) and 220SS (316 stainless steel) for general applications, and 220PVS (non-metallic PVDF) for service in corrosive liquids. The sensors mount in a 2" NPT pipe saddle or Threadolet for pipe sizes from 3" to over 40". Temperature ratings vary by model, with standard versions suitable for continuous service up to 221°F (105°C) and high-temperature models up to 285°F (141°C) continuous and 305°F (150°C) peak. Pressure ratings are up to 400 psi at 100°F for the brass and stainless models .
Resources & Documentation
Impeller Flow Sensor - Non-Magnetic, High Temp | Badger Meter Series 220
Product Specifications
- Manufacturer
- Badger Meter
- Product Number
- 220 Series
- Category
- Insertion Flow Sensors
- Flow Velocity Range
- 0.5 to 30 ft/sec (recommended)
- Accuracy
- ±1.0% FS (0.5-30 ft/sec)
- Temperature
- Up to 285°F (141°C) continuous, 305°F (150°C) peak
- Materials
- Brass (220BR), 316SS (220SS), PVDF (220PVS)
- Documents
- Product Manual, Product Specs (3 Files)















