The 6SL3520-2XB01-1AA0 is the simplest configuration in the 2XB B-connector range: 1.1 kW FSA, basic AA0 I/O Control, 380 × 156 × 129 mm IP65/IP66. At 3.1 A HO, it runs the lightest conveyor sections — a small roller bed, a diverter arm, or a labeling station — where the drive needs only a run command and an e-stop loop, hardwired directly to the terminals.

Why choose this over the AB0 or AF0 1.1 kW variants?

Choose AA0 when the section has minimal I/O and no fieldbus. It is the smallest, simplest, and most economical B-connector drive in the G115D line — the same FSA power stage as every other 1.1 kW variant, with no unused I/O and no network overhead. If the section grows in sensor count, AB0 adds I/O; if the line standard is PROFINET, AF0 integrates safety over the bus.