Product Specifications
- Brand
- TPS Pty Ltd
- Part Number
- hydroCHEM-DS
- Type
- Integrated Dosing Control System
- Measured Parameters
- Conductivity, pH, TDS, Temperature
- Pumps
- 3× Peristaltic (Nutrient A, Nutrient B, pH), 3 L/h
- Conductivity Range
- 0–9.9 mS/cm (0.01 mS/cm with Plus-Pack)
- pH Range
- 2.0–12.0 (0.01 pH with Plus-Pack)
- Protection
- IP65 (ABS Enclosure)
- Power
- 24 VDC, 300 mA Max
Product Description
The TPS hydroCHEM-DS is a pre-assembled dosing control panel that integrates conductivity and pH measurement with three chemical-resistant peristaltic pumps for fully automated nutrient and pH management. Designed primarily for hydroponic agriculture and water treatment, it combines measurement, control, and chemical dosing in a single IP65-rated ABS enclosure mounted on a 470 × 300 mm panel.
How does the flow-sensing safety interlock prevent over-dosing?
A built-in flow detection system monitors sample conductivity and automatically disables all three pumps when the reading drops below approximately 500 µS/cm — indicating that sample flow has stopped. This displays as a "NoFlo" alarm on the 80-character alphanumeric LCD. Without this interlock, a failed sample pump or blocked intake could cause the dosing pumps to inject concentrated nutrients or acid into an empty chamber, creating a hazardous chemical concentration when flow resumes. An emergency shutoff timer provides an additional safety layer by disabling any pump that runs continuously beyond the user-configurable time limit.
How is dosing precision controlled?
Each of the three pumps — Nutrient A, Nutrient B, and pH (acid or alkali, user-selectable) — operates with independently adjustable ON and OFF times of up to 30 minutes. This cycling prevents over-dosing by limiting how much chemical enters the system per cycle. The Conductivity probe includes an integral temperature sensor for automatic temperature compensation (ATC) across all parameters. A quick-dose function allows manual rapid nutrient or pH correction without reprogramming the setpoints.
What optional capabilities does the Plus-Pack add?
The Plus-Pack option upgrades the hydroCHEM-DS with RS232 serial output, data logging of up to 2,300 readings with date/time stamps, user-selectable logging intervals from 1 minute to 24 hours, high/low alarm relays, and extended measurement resolution (0.01 pH, 0.01 mS/cm, 0.01 ppK). A 24-hour calendar clock and one-touch notepad function support GLP-compliant record keeping.
TPS hydroCHEM-DS Integrated Conductivity and pH Dosing Controller with Flow-Sensing Safety
Product Specifications
- Brand
- TPS Pty Ltd
- Part Number
- hydroCHEM-DS
- Type
- Integrated Dosing Control System
- Measured Parameters
- Conductivity, pH, TDS, Temperature
- Pumps
- 3× Peristaltic (Nutrient A, Nutrient B, pH), 3 L/h
- Conductivity Range
- 0–9.9 mS/cm (0.01 mS/cm with Plus-Pack)
- pH Range
- 2.0–12.0 (0.01 pH with Plus-Pack)
- Protection
- IP65 (ABS Enclosure)
- Power
- 24 VDC, 300 mA Max





