Product Specifications
- Brand
- FFG Europe & Americas
- Part Number
- RAMBAUDI SARA
- Type
- Universal CNC Gantry Milling Machine with Moving Table
- Structure
- fixed gantry, moving table, Meehanite cast iron
- Travels
- X 3200 mm, Y 2400 mm, Z 900 mm
- Table
- 3000 x 2000 mm, 10 t load
- Head
- universal indexed milling head, 33 kW, 5000 rpm
- Rapid Feed
- 24 m/min
Product Description
Fixed gantry, moving table: the Rambaudi SARA keeps the heavy structure still and carries the workpiece past a 33 kW universal milling head at rapids to 24 m/min. Rambaudi now lives under the FFG Europe and Americas umbrella with production at Jobs Automazione in Piacenza, and the SARA itself was a joint Rambaudi-Sanco development aimed squarely at the die and mould sector. Travels span X 3200, Y 2400 and Z 900 mm over a 3000 x 2000 mm Meehanite cast table rated at 10 tonnes.
Moving table or moving gantry for 3-metre moulds?
A moving gantry accelerates tonnes of bridge on every pass; a moving table only accelerates the workpiece while the column mass sits steady under the spindle. For mould blocks up to 10 tonnes that keeps geometry predictable and lets operators reach the table on three sides. Rapids of 24 m/min are respectable for this class, and the fixed gantry shortens the foundation work a full moving-portal machine demands.
Is a universal indexed head enough for die work?
Most mould machining is 3+2 by nature: position the head, then cut. The SARA universal head - 33 kW, 5000 rpm - covers facing, drilling and angular milling, while a continuous 5-axis head adds capability many die shops pay for and rarely invoke. Against horizontal boring mills from PAMA or Soraluce on the same jobs, the vertical gantry keeps deep-cavity work visible and accessible, and against younger 5-axis portal designs such as the FPT Spirit range, the SARA argument is proven rigidity and a lower cost of ownership over a long service life.
Resources & Documentation
Rambaudi SARA Universal Gantry Milling Machine with Moving Table, 3200 x 2400 mm Travels
Product Specifications
- Brand
- FFG Europe & Americas
- Part Number
- RAMBAUDI SARA
- Type
- Universal CNC Gantry Milling Machine with Moving Table
- Structure
- fixed gantry, moving table, Meehanite cast iron
- Travels
- X 3200 mm, Y 2400 mm, Z 900 mm
- Table
- 3000 x 2000 mm, 10 t load
- Head
- universal indexed milling head, 33 kW, 5000 rpm
- Rapid Feed
- 24 m/min





