Product Specifications
- Brand
- Emerson Electric Co.
- Part Number
- IC694APU300
- Type
- High-Speed Counter Module
- Series
- PACSystems RX3i
- Inputs
- 12 Single-Ended / 6 Differential
- Input Threshold
- 5 VDC or 10–30 VDC (Selectable)
- Max Count Rate
- 1 MHz (80 kHz Typical)
- Outputs
- 4 Sourcing, 10–30 VDC, 500 mA
- Counter Configurations
- 1 Complex / 2 Independent / 4 Simple
- Isolation
- 250 VAC Continuous (Field-to-Backplane)
- Protection
- IP20, Rack-Mount, Hot-Swap
Product Description
The IC694APU300 is the high-speed counter module for Emerson's PACSystems RX3i platform — 12 pulse inputs configurable as single-ended (positive logic) or 6 differential pairs, capable of counting pulse trains up to 1 MHz without CPU intervention. Despite some third-party listings categorizing it under "analog I/O," the IC694APU300 processes digital pulse edges, not analog voltage levels: it counts rising and falling edges from incremental encoders, turbine flowmeters, proximity sensors, and photoelectric sensors, and reports the accumulated count, frequency, and direction to the RX3i CPU over the backplane. Four sourcing outputs provide direct control of external devices based on counter preset values — a diverter gate fires when the encoder reaches 10,000 counts, a batch valve closes when the flowmeter totalizer reaches the target volume. The module's 1 MHz bandwidth handles encoder resolutions far beyond what a standard discrete input module (typically limited to 50–100 Hz by the CPU scan time) can capture.
Flexible counter architecture: one module, four personalities
The 12 inputs and internal logic can be software-configured into four distinct topologies without wiring changes. In 4-simple-counter mode, the module appears as four independent 16-bit up-counters, each accepting a single pulse input and an optional reset — four separate flowmeters, four independent conveyor belt encoders, or four proximity sensors counting parts on parallel lines. In 2-independent-complex-counter mode, two counters each support up/down counting with direction input, quadrature decoding (A/B phase) for bi-directional encoders, or pulse/direction mode for stepper motor position feedback. In 1-complex-counter mode, all 12 inputs consolidate into a single high-function counter with multiple strobe, reset, and preset inputs — suitable for a precision metering application where one encoder needs multiple registration triggers for different events in the process cycle. The input threshold is globally selectable between 5 VDC (for TTL/RS-422 line-driver encoders) and 10–30 VDC (for industrial 24 V sensors) — a jumper block sets the threshold for all inputs, and the module's internal comparator cleans up noisy or slow-rising edges into sharp logic transitions at the counter's clock input.
Related Products
Resources & Documentation
Emerson IC694APU300 | RX3i High-Speed Counter Module, 12 Inputs, 1 MHz, 4 Outputs
Product Specifications
- Brand
- Emerson Electric Co.
- Part Number
- IC694APU300
- Type
- High-Speed Counter Module
- Series
- PACSystems RX3i
- Inputs
- 12 Single-Ended / 6 Differential
- Input Threshold
- 5 VDC or 10–30 VDC (Selectable)
- Max Count Rate
- 1 MHz (80 kHz Typical)
- Outputs
- 4 Sourcing, 10–30 VDC, 500 mA
- Counter Configurations
- 1 Complex / 2 Independent / 4 Simple
- Isolation
- 250 VAC Continuous (Field-to-Backplane)
- Protection
- IP20, Rack-Mount, Hot-Swap









