
Product Specifications
- Brand
- Emerson Electric Co.
- Part Number
- IC086SLM082
- Type
- Managed Industrial Ethernet Switch
- Series
- PACSystems Industrial Ethernet Switches
- Port Configuration
- 8× 10/100BaseT(X) RJ45 + 2× SFP (100/1000Base-X)
- Management
- Managed (Layer 2), Web, CLI, SNMP v1/v2c/v3
- Switching Capacity
- 5.6 Gbps
- Switching Latency
- 7 μs
- MAC Address Table
- 8K Entries
- Power Input
- 12–48 VDC, Triple Redundant Inputs
- Power Consumption
- 9 W (Typical)
- Operating Temperature
- -40°C to +70°C
- Ingress Protection
- IP30
- Dimensions
- 52 × 106.1 × 144.3 mm
- Weight
- 730 g
- Mounting
- DIN Rail / Wall Mount
Product Description
The IC086SLM082 is the standard managed Layer 2 member of Emerson's 10-port industrial Ethernet switch family. It delivers the core managed-switch feature set — VLANs, spanning tree, SNMP monitoring, redundant ring, and port security — without the PROFINET IO device stack found on the GLM series. For plants running EtherNet/IP, Modbus TCP, or plain non-deterministic Ethernet at the control network layer, the SLM082 provides the same switching hardware and environmental ruggedness as its PROFINET sibling at a lower complexity and cost point.
SLM vs. GLM — which management tier fits your network?
The SLM and GLM series share the same switching ASIC, the same enclosure, and the same -40°C to +70°C rating. The difference is what the switch talks to, beyond forwarding frames. An SLM switch is managed through standard IT interfaces — web browser, SSH/Telnet CLI, SNMP — and participates in standard Layer 2 redundancy (STP/RSTP/MSTP, proprietary ring). A GLM switch adds a PROFINET IO device identity: the PLC discovers the switch, exchanges cyclic data, and manages redundancy through the automation engineering tool. If your plant's control network is not PROFINET-based, the additional PROFINET stack in a GLM switch is unused — and the SLM082 delivers equivalent switching performance without it.
Why triple DC power inputs?
The IC086SLM082 provides three separate DC power input paths: two on a 7-pin terminal block (12–48 VDC each) and one on a barrel jack (12–45 VDC). The most common configuration uses the two terminal-block inputs fed from independent 24 VDC power supplies for N+1 redundancy. The barrel jack can serve as a third input for a backup battery or UPS, or as a convenient commissioning port — power the switch from a wall adapter on the bench without disturbing the permanent wiring. The 9 W typical consumption means a small DIN-rail UPS can keep the switch running through a brief power interruption, maintaining the network path while downstream devices reboot.
Related Products
Resources & Documentation
10-Port Managed Industrial Ethernet Switch, 8× RJ45 + 2× SFP | Emerson IC086SLM082
Product Specifications
- Brand
- Emerson Electric Co.
- Part Number
- IC086SLM082
- Type
- Managed Industrial Ethernet Switch
- Series
- PACSystems Industrial Ethernet Switches
- Port Configuration
- 8× 10/100BaseT(X) RJ45 + 2× SFP (100/1000Base-X)
- Management
- Managed (Layer 2), Web, CLI, SNMP v1/v2c/v3
- Switching Capacity
- 5.6 Gbps
- Switching Latency
- 7 μs
- MAC Address Table
- 8K Entries
- Power Input
- 12–48 VDC, Triple Redundant Inputs
- Power Consumption
- 9 W (Typical)
- Operating Temperature
- -40°C to +70°C
- Ingress Protection
- IP30
- Dimensions
- 52 × 106.1 × 144.3 mm
- Weight
- 730 g
- Mounting
- DIN Rail / Wall Mount











