12 month warranty Request a Quote Technical Support
Sign In

Product Specifications

Product Description

The PI 1M is aimed at metal, not at general surface measurement. At 1 kHz the PI 1M resolves 72 x 56 pixels, which is not a general purpose thermal image but a line of sight into a fast metal process. The camera uses a 15 µm CMOS detector with a 0.85 to 1.1 µm passband, where metal at 450 °C and above still emits enough energy to read.

Resolution trades against frame rate: 764 x 480 at 32 Hz, 382 x 288 at 80 Hz, 72 x 56 at 1 kHz, and a 764 x 8 linescan at 1 kHz, while the temperature floor moves with the mode from 450 °C at 27 Hz to 600 °C at 1 kHz. The ceiling stays at 1800 °C.

Accuracy is tied to the object temperature rather than to full scale: ±1% of reading below 1400 °C at 27, 32 and 80 Hz, ±2% below 1600 °C, and half a point more at 1 kHz. The analog output is 1 ms at 0 to 10 V, taken from an 8 x 8 pixel block that can be positioned anywhere in the field of view.

The housing is IP67. It measures 46 x 56 x 88 to 129 mm and weighs 245 to 311 g depending on lens, and it runs from 5 to 50 °C on USB power. PIX Connect software and the SDK come with the camera. The optional industrial process interface adds three 4-20 mA outputs, two analog inputs, a digital input, three alarm relays and a fail-safe relay.

Optris
Compare

Optris PI 1M Shortwave Infrared Camera, 1 kHz, 450-1800 °C

1 µm, 1 kHz, 764 x 480
MPN/Series: PI 1M

Product Specifications

Manufacturer
Optris
Model Number
PI 1M
Product Type
Shortwave Infrared Camera
Resolution
764 x 480 (32 Hz), 382 x 288 (80 Hz), 72 x 56 (1 kHz), 764 x 8 (1 kHz linescan)
Spectral Range
0.85 – 1.1 µm
Temperature Ranges
450 – 1800 °C (27 Hz); 500 – 1800 °C (32/80 Hz); 600 – 1800 °C (1 kHz)
Accuracy
±1% of reading below 1400 °C (27/32/80 Hz); ±1.5% at 1 kHz
Documents
Product Manual, Product Specs
Optris PI 1M Shortwave Infrared Camera, 1 kHz, 450-1800 °C