The 6SL3230-3YE52-0AF0 is the standard-coating, no-panel 200 kW G120X with C2 EMC. It is the baseline configuration for a 200 kW pump or fan drive in an indoor installation: the tighter C2 emission limits plus the simplest ordering code — no conformal coating, no operator panel, just the drive and its integrated C2 filter.

No IOP-2, no coating — the essential 200 kW specification

Stripping the options back to the essential electrical specification — C2 EMC, standard coating, no local panel — produces the drive that most 200 kW installations actually need. The drive connects to the plant's PROFINET or PROFIBUS network for commissioning and monitoring; the electrical room's HVAC controls the atmosphere; the SCADA or DCS provides the operator interface. Adding an IOP-2 or 3C3 coating to this variant would add cost for features that the installation does not require. For the system integrator building a multi-drive pump station, the 0AF0 is the cost-optimized 200 kW C2 drive.

200 kW C2 — when the largest drive shares a transformer

At 500 A, the 200 kW G120X is often one of the largest loads on its supply transformer. C2 EMC ensures the drive's conducted emissions stay within limits that protect other equipment on the same supply — smaller drives, PLC racks, instrumentation, and building services — from harmonic interference. In a pumping station where the same transformer feeds the pump drives, the control system, and the building's lighting and HVAC, C2 compliance on the largest drive is a meaningful specification, not a checkbox.