12 month warranty Request a Quote Technical Support
Sign In

Product Specifications

Product Description

When a 30 kW load on a 200-240 V supply needs PROFINET plus an external brake resistor or du/dt filter, this SINAMICS G120X carries DC terminals for that add-on — no step-up transformer, just the low-voltage three-phase supply it was built for.

When do the DC terminals actually matter?

The 1 in the suffix means DC terminals are present, so you can bolt on an external du/dt filter for longer motor-cable runs — keeping winding stress within limits when the feeder between drive and motor is extended — or an external brake resistor for high-inertia and decelerating loads. If the motor cable is short and no external braking is planned, the 0UF0 sibling drops the DC terminals for a leaner, lower-cost build.

At 30 kW it delivers 104 A rated output (141 A maximum) at 240 V, with 110% overload for 60 s, in a 275 x 551 x 248 mm FSE frame, IP20 for control-cabinet installation. PROFINET and EtherNet/IP are onboard, so the unit joins an industrial-Ethernet controller as a native node with no protocol gateway. The 1UP0 sibling is the PROFIBUS DP option on the same 30 kW, DC-terminal platform.

Siemens
Compare

Siemens 6SL3230-3YC34-1UF0 | SINAMICS G120X 30 kW 200–240 V Drive with PROFINET

30 kW 240 V PROFINET + DC terminals
MPN/Series: 6SL3230-3YC34-1UF0

Product Specifications

Brand
Siemens
Model Number
6SL3230-3YC34-1UF0
Type
SINAMICS G120X Frequency Converter
Series
SINAMICS G120X
Rated Power
30 kW (LO)
Rated Current
104 A (LO, 240 V); 80 A (HO); 141 A (maximum)
Supply Voltage
3 AC 200-240 V, 47-63 Hz
Frame Size
FSE (275 x 551 x 248 mm)
Protection Rating
IP20 / UL Open Type
EMC Filter
Unfiltered
DC Terminals
Yes
Communication
PROFINET, EtherNet/IP
Overload Capacity
110% for 60 s, 100% for 240 s (LO, 300 s cycle); 150% for 60 s (HO, 600 s cycle)
Output Frequency
0-550 Hz
Siemens 6SL3230-3YC34-1UF0 | SINAMICS G120X 30 kW 200–240 V Drive with PROFINET