12 month warranty Request a Quote Technical Support
Sign In

Product Specifications

Product Description

A 0.75 kW pump or fan on a 400 V line, an enclosure that already carries the EMC filter, and a PROFINET controller are the three conditions this drive is built for. The 6SL3230-3YE10-0UF0 is the G120X build for that combination: no filter inside the drive, 2.2 A of rated output current at 400 V, 2.1 A at 440 to 480 V.

PROFINET and EtherNet/IP are both built into the drive. Leaving the filter out moves the EMC work back to the enclosure: the unfiltered build carries no EMC category of its own, and the motor cable is limited to 150 m shielded or 300 m unshielded. A longer run does not change the rating, but it sits outside the condition the build is rated for.

The hardware carries two ratings. At low overload it is 0.75 kW and 2.2 A, at high overload 0.55 kW and 1.7 A. Pump and fan loads are variable torque, so the low-overload column applies: 110% of rated current for 60 s inside a 300 s cycle, while a conveyor or a positive-displacement pump that needs 150% for 60 s drops the rating to 0.55 kW and the current to 1.7 A.

Six digital inputs, one fail-safe input, two relay outputs and two differential analog inputs cover a pump panel, and a PTC or KTY sensor reads to ±5 °C. The drive runs from -20 to 45 °C, moves 0.005 m³/s of cooling air through its own fan, and weighs 3.2 kg. STO is available without a SIRIUS device, for example from an S7-1500F.

The FSA frame is 73 mm wide, and the 3 kW rating that shares it uses the same 73 mm; a 0.75 kW unit does not buy back panel width. Depth is 218 mm with the fan fitted. The MLFB fixes the network at order time: the same frame is also built with PROFIBUS DP, and that unit does not join a PROFINET line.

Siemens
Compare

Siemens 6SL3230-3YE10-0UF0 SINAMICS G120X 0.75 kW Unfiltered PROFINET Drive

0.75 kW, FSA, PROFINET/EtherNet/IP
MPN/Series: 6SL3230-3YE10-0UF0

Product Specifications

Brand
Siemens
Model Number
6SL3230-3YE10-0UF0
Type
SINAMICS G120X Frequency Converter
Series
SINAMICS G120X
Rated Power
0.75 kW (LO) / 0.55 kW (HO)
Rated Output Current
2.2 A at 400 V (LO), 2.1 A at 440-480 V; 1.7 A (HO)
Supply Voltage
3 AC 380-480 V +10%/-20%, 47-63 Hz
Frame Size
FSA (73 x 232 x 218 mm)
Net Weight
3.2 kg
Protection Rating
IP20 / UL Open Type
EMC Filter
Unfiltered
Communication
PROFINET, EtherNet/IP
Overload Capacity
110% for 60 s (LO); 150% for 60 s (HO)
Output Frequency
0-550 Hz (V/f), 0-200 Hz (vector)
Siemens 6SL3230-3YE10-0UF0 SINAMICS G120X 0.75 kW Unfiltered PROFINET Drive