Product Specifications
- Brand
- Siemens
- Model Number
- 6SL3520-2XE01-1AF0
- Type
- SINAMICS G115D wall-mounted distributed drive
- Rated Power
- 1.1 kW (1.5 hp)
- Rated Current
- 3.1 A (6.2 A for 3 s)
- Input Voltage
- 3AC 380-480 V
- Output Frequency
- 0-550 Hz
- Degree of Protection
- IP65/66 (UL Type 4X)
- Ambient Temperature
- -30 to +55 C
- EMC Filter
- Integrated Category C2
- Communication
- PROFINET + PROFIsafe + EtherNet/IP
Product Description
The 1.1 kW step of the SINAMICS G115D 2XE family fills the gap between 0.55 and 1.5 kW: a wall-mounted distributed drive on the FSA frame, 380x156x129 mm, IP65/66 on the machine, delivering 3.1 A continuous and 6.2 A for 3 s at 200% overload, with PROFINET, PROFIsafe and EtherNet/IP through two M12 ports. It is the drive for a conveyor band that outgrew its 0.55 kW section but never loads close to 1.5 kW.
When is 1.1 kW the right step between 0.55 and 1.5?
A band running on the 0.55 kW step that gains a heavier transfer stalls on starts. Jumping to the 1.5 kW step buys 4.1 A continuous - a third more current than this drive - and the band that never loads past 3.1 A pays for headroom it does not use. This step splits the difference: 3.1 A continuous, 6.2 A for 3 s at 200% overload, natural convection on the same 380x156x129 mm FSA frame as the rest of the family, and the integrated Category C2 filter keeps external EMC hardware off the wiring list. IP65/66 keeps it on the machine next to the motor, so no control cabinet is pulled out to the section.
What does PROFINET change on a 1.1 kW section?
Terminal control tells the controller nothing about how the section runs. Two M12 D-coded ports put this drive on a PROFINET daisy chain along the machine; close the ends into a ring and one cut cable no longer takes every downstream drive offline. PROFIsafe travels the same hybrid cable that feeds the power, so the safety stop needs no separate wiring, and TIA Portal macros bring the drive into the controller without hand-writing telegrams. Sections that stay hardwired take the AB0 or AA0 variant of the same 1.1 kW FSA hardware and run on terminals instead.
Related Products
Resources & Documentation
Siemens 6SL3520-2XE01-1AF0 | SINAMICS G115D 1.1 kW FSA Fanless Distributed Drive with PROFINET
Product Specifications
- Brand
- Siemens
- Model Number
- 6SL3520-2XE01-1AF0
- Type
- SINAMICS G115D wall-mounted distributed drive
- Rated Power
- 1.1 kW (1.5 hp)
- Rated Current
- 3.1 A (6.2 A for 3 s)
- Input Voltage
- 3AC 380-480 V
- Output Frequency
- 0-550 Hz
- Degree of Protection
- IP65/66 (UL Type 4X)
- Ambient Temperature
- -30 to +55 C
- EMC Filter
- Integrated Category C2
- Communication
- PROFINET + PROFIsafe + EtherNet/IP












