Product Specifications
- Manufacturer
- Siemens
- Part Number
- 6SL3520-2XA27-5AF0
- Product Type
- SINAMICS G115D wall-mounted distributed drive
- Rated Power
- 7.5 kW at 400 V (HO); 10 hp at 480 V (NEC HO)
- Supply Voltage
- 3AC 380–480 V, 45–66 Hz
- Rated Output Current
- 19.00 A at 400 V
- Max Output Current
- 38.00 A
- Overload
- 200% for 3 s, then 150% for 57 s in a 300 s cycle
- Frame Size
- FSC
- Degree of Protection
- IP66 cable-gland version; IP65 plug-in version; UL Type 4X
- Communication
- PROFINET, EtherNet/IP; two M12 D-coded ports P1/P2
- Safety
- PROFIsafe STO, SIL 2 / PL d, Category 3
- Cooling
- Integrated fan
- Dimensions
- 425 × 180 × 169 mm
- Net Weight
- 7.91 kg
- Ambient Temperature
- -30 to 55 °C, derating above 40 °C
- Certification
- UL, cUL, CE, C-Tick (RCM), EAC, KCC, SEMI F47
Product Description
The Siemens 6SL3520-2XA27-5AF0 is a SINAMICS G115D wall-mounted distributed drive, a 7.5 kW conveyor drive in the FSC frame. It runs from a 3AC 380–480 V supply at 45–66 Hz, draws 17.11 A input current, and delivers 19.00 A rated output current at 400 V; the 38.00 A maximum is a 200% / 3 s overload rating, not continuous current.
At full load the drive dissipates 245 W; the FSC frame uses an integrated fan. The housing measures 425 × 180 × 169 mm and weighs 7.91 kg; it mounts on the conveyor frame without a cabinet. This variant takes an external 24 V control supply; the PROFINET version draws a typical 580 mA, excluding I/O loads.
The output stage switches at 4 kHz. Vector control covers 0–240 Hz and V/f control 0–550 Hz. Overload repeats on a 300 s cycle: 200% for 3 s, then 150% for 57 s. Size the axis on 19 A continuous and use the 38 A margin for starts and jams.
An integrated braking chopper accepts an external resistor down to 40 Ω, the minimum for the FSC frame. The frame takes 81 Ω / 600 W or 72 Ω / 1200 W external resistors. The built-in resistor is 88 Ω with 20 W continuous and 200 W peak. The 40 Ω value is a floor, not a target: a lower resistance raises braking current.
PROFINET and EtherNet/IP connect through two M12 D-coded ports, P1 and P2, with 100 m maximum cable length between nodes. PROFIsafe carries STO at SIL 2 / PL d, Category 3. The C2 EMC filter is integrated, and a memory card slot copies parameters across identical drives.
Ambient range is -30 to 55 °C, with derating above 40 °C. The cable-gland version is IP66 and UL Type 4X; the plug-in version is IP65. Shielded motor cable is limited to 15 m. The drive is rated 10 hp at 480 V.
Related Products
Resources & Documentation
Siemens 6SL3520-2XA27-5AF0 SINAMICS G115D 7.5 kW PROFINET Drive
Product Specifications
- Manufacturer
- Siemens
- Part Number
- 6SL3520-2XA27-5AF0
- Product Type
- SINAMICS G115D wall-mounted distributed drive
- Rated Power
- 7.5 kW at 400 V (HO); 10 hp at 480 V (NEC HO)
- Supply Voltage
- 3AC 380–480 V, 45–66 Hz
- Rated Output Current
- 19.00 A at 400 V
- Max Output Current
- 38.00 A
- Overload
- 200% for 3 s, then 150% for 57 s in a 300 s cycle
- Frame Size
- FSC
- Degree of Protection
- IP66 cable-gland version; IP65 plug-in version; UL Type 4X
- Communication
- PROFINET, EtherNet/IP; two M12 D-coded ports P1/P2
- Safety
- PROFIsafe STO, SIL 2 / PL d, Category 3
- Cooling
- Integrated fan
- Dimensions
- 425 × 180 × 169 mm
- Net Weight
- 7.91 kg
- Ambient Temperature
- -30 to 55 °C, derating above 40 °C
- Certification
- UL, cUL, CE, C-Tick (RCM), EAC, KCC, SEMI F47







