The 6ES7194-2LH03-0AB0 is the angled version of the ET 200AL M8 power jumper. Where a straight connector would stick out and risk being knocked or constrain the cabinet door, the angled M8 male connectors route the cable close to the module face. At 0.3 m it bridges slightly wider gaps between modules than the 0.19 m straight jumper, and the green PVC jacket keeps the power‑line colour code consistent across the installation.

Space‑Saving Angled Design

• Reduced installation height: the cable exits at 90° to the connector axis, keeping the protrusion from the module face to a minimum.
• Ideal for confined spaces: control cabinets with shallow doors, machine frames with limited clearance, or stacked module rows where straight connectors would interfere.

Physical Toughness

• IP65/67: dust‑tight and water‑jet‑proof when the M8 connectors are correctly screwed down.
• Cable‑chain rated: 2.5 million bending cycles at a 52 mm bending radius.
• Silicone‑free: certified for paint‑shop and clean‑room use.

Electrical Layout

• 4‑pole A‑coded: carries 24 V, 0 V and two signal lines through a single compact M8 connector.
• Pure copper conductors (4 Li9Y 0.50 mm²): ensure reliable power delivery over the entire module chain.