The Siemens 6SL3520-0XD00-5AF0 combines the PROFINET/EtherNet/IP communication variant with the 0XD connector configuration at the 0.55 kW power rating of the SINAMICS G115D FSA frame. With 1.7 A rated output (High Overload) and a 380–480 V 3-phase supply, it brings full networked drive functionality — cyclic process data, remote diagnostics, PROFIsafe SIL 2 safety, and conveyor technology function blocks — to the smallest conveyor sections in an intralogistics or packaging line.

Why PROFINET at 0.55 kW?

Integrating even the smallest conveyor sections into the PROFINET network creates a unified engineering and diagnostic environment across the entire line. Every drive — regardless of power — appears in the TIA Portal project with the same parameter set, the same diagnostic buffer, and the same conveyor function blocks. Safety signals for a 0.55 kW diverter section travel on the same bus cable as the 7.5 kW main conveyor. The alternative — running hardwired I/O to the smallest sections while networking the larger ones — creates two maintenance workflows, two sets of troubleshooting procedures, and two spare-parts philosophies. PROFINET everywhere eliminates that split.

What motor types are supported?

The drive supports IE3 asynchronous motors, IE4 synchronous reluctance motors, and SIMOGEAR geared motor combinations up to 0.55 kW. Control modes: V/f, V/f with FCC, sensorless vector control. Output frequency: 0–550 Hz (V/f), 0–240 Hz (vector). Overload: 200% (3.4 A) for 3 seconds. Integrated 180 V DC brake control for electromechanical motor brakes. Pulse frequency adjustable from 4 to 16 kHz in 2 kHz steps.

Frequently Asked Questions

Does the 0XD connector affect PROFINET functionality?

No. The PROFINET interface is independent of the power connector type. The 0XD designation (position 10 = D) refers to the power and I/O connector configuration, not the fieldbus port. PROFINET communication, PROFIsafe safety, and conveyor technology functions operate identically on 0XD and 1XB variants.

When should I choose this over the 1XB equivalent?

The two are functionally identical at 0.55 kW PROFINET. Choose the variant whose connector type matches your available cable assemblies or existing fleet standard. If you already have 0XD drives on your line and want connector consistency for maintenance, stay with 0XD. If you are starting fresh, either variant works — consult your Siemens distributor for regional availability and lead time on each connector type.