Product Specifications
- Brand
- Renu Electronics GmbH
- Part Number
- FLA0402L-V2
- Type
- Analog Expansion Module for FlexiLogics PLCs
- Channels
- 4 analog inputs (16-bit) plus 2 analog outputs (12-bit)
- Input Signals
- 0-10 V, 4-20 mA, 0-20 mA selectable per channel
- Accuracy
- +/- 0.2 percent FS at 25 deg C, linearity 0.5 percent FS
- Impedance
- 470 kOhm voltage mode, 51 Ohm current mode
- Power Supply
- 24 VDC +/- 20 percent, 50 mA, 1.2 W
- Environment
- 0 to 55 deg C, 10 to 90 percent humidity, DIN-rail, 100 x 26 x 70 mm
Product Description
Analog expansion is where small PLC systems quietly run out of room, and the Renu FLA0402L-V2 solves it the modular way: four analog inputs and two analog outputs added to any FlexiLogics base unit through the backplane, with wiring on 3.81 mm removable terminals and configuration through the same FlexiSoft environment that programs the controller.
What do 16-bit inputs and 12-bit outputs actually cover?
Different jobs, deliberately: the input side resolves 0-10 V, 4-20 mA or 0-20 mA at 16 bits for temperature, pressure and flow signals that reward resolution, while the output side drives valves, dampers and variable-speed references at 12 bits - 4096 steps across the span - where the actuator, not the DAC, limits the loop. Accuracy holds plus/minus 0.2 percent of full scale at 25 deg C with 0.5 percent linearity, and the module carries UL and CE marks including Class I Division 2 suitability.
How does the wiring scale?
By terminal, not by cabinet: removable 3.81 mm pitch connectors mean the module swaps without unwiring the field, inputs and outputs are grouped in separate terminal sections on a common 24 V DC supply, with no channel-to-channel isolation, and the locking connector plus DIN-rail slider hold the stack together under vibration. For FlexiLogics users the channel counts are registers - inputs in XW, outputs in YW, configuration in MW - so routing an analog signal is an address in the ladder, not an engineering project.
Renu FLA0402L-V2 Analog Expansion Module, 4 Inputs and 2 Outputs at 16-Bit
Product Specifications
- Brand
- Renu Electronics GmbH
- Part Number
- FLA0402L-V2
- Type
- Analog Expansion Module for FlexiLogics PLCs
- Channels
- 4 analog inputs (16-bit) plus 2 analog outputs (12-bit)
- Input Signals
- 0-10 V, 4-20 mA, 0-20 mA selectable per channel
- Accuracy
- +/- 0.2 percent FS at 25 deg C, linearity 0.5 percent FS
- Impedance
- 470 kOhm voltage mode, 51 Ohm current mode
- Power Supply
- 24 VDC +/- 20 percent, 50 mA, 1.2 W
- Environment
- 0 to 55 deg C, 10 to 90 percent humidity, DIN-rail, 100 x 26 x 70 mm







