
Product Specifications
- Brand
- Renishaw
- Part Number
- RSP3
- Series
- RSP3
- Type
- 3D/2D Analog Scanning CMM Probe
- Measurement Type
- 3D/2D Analog Scanning + Discrete Touch-Trigger
- Resolution
- <0.1 μm
- Stylus Deflection Range
- ±0.5 mm
- Stylus Length Range
- 20–656 mm (across variants)
- Mounting
- Magnetised Kinematic Coupling (REVO/REVO-2)
- Interface
- UCC S5
- Operating Temperature
- 20°C ±2°C
Product Description
The RSP3 is Renishaw's family of analog scanning probes purpose-built for the REVO 5-axis measurement system on coordinate measuring machines — 3D scanning on RSP3-1/2/3/4 and 2D scanning on RSP3-6. Unlike conventional touch-trigger probes that capture discrete points, each RSP3 variant performs continuous analog scanning — the stylus deflects up to ±0.5 mm in all directions while an optical transducer sensor tracks its position at sub-0.1 μm resolution. Five variants span effective stylus lengths from 20 mm to 656 mm, covering everything from small precision bores to deep internal cavities. All models support both scanning and discrete touch-trigger measurement in a single integrated device, eliminating the need to switch probes between fast scanning passes and high-accuracy point checks.
How does the optical transducer achieve sub-0.1 μm resolution?
The RSP3 sensor uses two infrared LEDs that project beams onto mirrors mounted on a dual-diaphragm pivoting structure within the probe body. As the stylus deflects during measurement, the mirror angles shift, and the reflected beams move across two Position Sensitive Devices (PSDs). These PSDs produce non-linear analogue outputs in three probe axes (P, Q, R), which the UCC S5 controller converts to Cartesian X, Y, Z coordinates through a calibration matrix built from a 45 mm datum sphere. The dual-diaphragm spring system — one diaphragm compliant in all directions, the other stiff in XY but compliant in Z — provides a spring rate of 0.2–0.6 N/mm depending on stylus configuration, ensuring consistent contact force across the measurement range.
Which RSP3 variant fits which application?
| Variant | Scanning | Effective Stylus Length | Stylus Thread | Weight | Typical Application |
|---|---|---|---|---|---|
| RSP3-1 | 3D | 20–50 mm | M3 | 86 g | Small bores, short-reach precision features |
| RSP3-2 | 3D | 44–99 mm | M3 | 90 g | General-purpose CMM scanning |
| RSP3-3 | 3D | 114–194 mm | M3 | 94 g | Medium-reach, deeper features |
| RSP3-4 | 3D | 214–394 mm | M3 | 101 g | Long-reach 3D form measurement |
| RSP3-6 | 2D | Up to 656 mm | M2 | 300 g | Deep-bore inspection, restricted-access cavities |
All five variants mount via a common magnetised kinematic coupling, enabling automated probe exchange through thermally controlled change racks (RCP TC-2 and RCP TC-3) on Renishaw MRS/MRS2 rail systems. The RSP3-6 sacrifices Z-axis scanning for extended reach — straight extensions reach up to 800 mm and cranked stylus holders up to 600 mm from the REVO A-axis centre — but retains full 3D touch-trigger capability for point measurements.
Resources & Documentation
Renishaw RSP3 3D/2D Analog Scanning Probe with <0.1 μm Resolution for Coordinate Measuring Machines
Product Specifications
- Brand
- Renishaw
- Part Number
- RSP3
- Series
- RSP3
- Type
- 3D/2D Analog Scanning CMM Probe
- Measurement Type
- 3D/2D Analog Scanning + Discrete Touch-Trigger
- Resolution
- <0.1 μm
- Stylus Deflection Range
- ±0.5 mm
- Stylus Length Range
- 20–656 mm (across variants)
- Mounting
- Magnetised Kinematic Coupling (REVO/REVO-2)
- Interface
- UCC S5
- Operating Temperature
- 20°C ±2°C





