

Product Specifications
- Manufacturer
- Kobold
- Product Number
- DON Series
- Type
- Oval Gear Positive Displacement Flow Meter
- Flow Rates
- 0.13 to 9.5 GPH up to 40 to 660 GPM
- Accuracy
- ±0.2 to 1% of reading (depending on configuration)
- Line Sizes
- 1/8 up to 4 inches
- Construction
- Aluminum or 316L stainless steel
- Fittings
- Threaded (NPT, G) or flanged (ANSI, DIN)
- Maximum Temperature
- 300 °F (149 °C) with FKM seals; 212 °F (100 °C) with NBR
- Maximum Pressure
- 1450 psi on small threaded bodies; 230 psi on the 4 inch body
- Features
- Reed switch or Hall pulse output, quadrature output for direction detection, 4-20 mA and LCD options
- Documents
- Product Manual, Product Specs (2 Files)
Product Description
Diesel, hydraulic oil, resin and paste pass the same meter only when it tolerates viscosity and needs no straight run. The Kobold DON is an oval gear meter: two precision-machined rotors trap a fixed volume per revolution inside the measuring chamber, and magnets in the rotors drive a pulse output that does not depend on the conductivity of the liquid.
Flow ranges start at 0.13 to 9.5 GPH in the smallest body and reach 40 to 660 GPM in the 4 inch size. Accuracy is ±0.2 to 1% of reading depending on configuration. Standard rotors cover 1000 cP; above that, special cut rotors hold the pressure drop inside the 1 bar limit and the maximum flow is derated, down to a 0.05 multiplier at 1,000,000 cP.
Ports run from 1/8 to 4 inch in NPT or G thread, with 150 or 300 lb ANSI and PN40 DIN flanges on the larger sizes. Aluminum bodies suit fuels and lubricants, 316L stainless covers most chemicals. Pressure is not one figure: 1450 psi belongs to the small threaded bodies, while the 4 inch body stops at 230 psi. The 300 °F ceiling needs the FKM O-ring, since NBR stops at 212 °F.
The liquid has to be clean. Recommended filtration is 75 µm on the small bodies, 150 µm in the middle sizes and 350 µm on the largest. The pulse output comes as a reed switch or a Hall sensor, 4-20 mA and LCD totalizers are further options, and the quadrature output provides two phase-shifted signals for direction detection.
Resources & Documentation
Kobold DON Oval Gear Flow Meter, 0.13-660 GPM, Aluminum or 316L
Product Specifications
- Manufacturer
- Kobold
- Product Number
- DON Series
- Type
- Oval Gear Positive Displacement Flow Meter
- Flow Rates
- 0.13 to 9.5 GPH up to 40 to 660 GPM
- Accuracy
- ±0.2 to 1% of reading (depending on configuration)
- Line Sizes
- 1/8 up to 4 inches
- Construction
- Aluminum or 316L stainless steel
- Fittings
- Threaded (NPT, G) or flanged (ANSI, DIN)
- Maximum Temperature
- 300 °F (149 °C) with FKM seals; 212 °F (100 °C) with NBR
- Maximum Pressure
- 1450 psi on small threaded bodies; 230 psi on the 4 inch body
- Features
- Reed switch or Hall pulse output, quadrature output for direction detection, 4-20 mA and LCD options
- Documents
- Product Manual, Product Specs (2 Files)















