The 6ES7194-2LH03-1AB0 brings 24 V DC power to ET 200AL modules where a straight connector would protrude too far. Both ends are angled — an M8 male on one side, an M8 female on the other — so the cable hugs the module face and still allows daisy‑chaining to the next device. At 0.3 m it bridges short gaps inside a control cabinet or under a machine frame, and the gray PVC jacket keeps the colour convention consistent: green for data buses, gray for power.

Angled for Tight Spaces

• 90° cable exit at both ends: reduces the overall height from the module face to under 30 mm, making it possible to close a shallow cabinet door or fit a second row of modules directly above.
• M8 male to female: extends an existing power daisy‑chain without needing an adapter. Plug the male end into the module, and the next jumper plugs into the female end.

Reliable Power, Flex After Flex

• 4 Li9Y 0.50 mm² conductors: pure copper, 5.2 mm outer diameter, 44 kg/km — built for repeated flexing in cable chains.
• 2.5 million bending cycles at a 52 mm bending radius, tested at 3 m/s and 10 m/s² — keeps up with fast‑moving machine axes.
• IP65/67 when properly screwed down: dust‑tight and protected against water jets, suitable for wash‑down environments.