The 6SL3520-0XM00-3AB0 delivers 0.37 kW from the G115D fanless FSA platform with the integrated C2 EMC line filter — the same filter as the AF0 variant, but with standard STO via F-DI instead of PROFIsafe. It is positioned for light-duty conveyor stations where industrial EMC compliance matters and the safety architecture is handled through conventional hardwired safety circuits.

What is the G115D maintenance profile?

The distributed drive architecture fundamentally changes the maintenance equation compared to cabinet-mounted VFDs. With no control cabinet fans, no cabinet air filters, and no drive cooling fan (FSA is fanless), there are no consumable cooling components to replace. The IP65/IP66 enclosure protects against dust and water ingress, so periodic cleaning is limited to the external housing surfaces. The only wear item is the internal braking resistor under heavy cyclic braking duty — and it is field-replaceable. The drive reports its own operating hours, temperature history, and fault log via PROFINET, enabling condition-based rather than calendar-based maintenance scheduling.

How does the G115D handle ambient temperature extremes?

The FSA frame is rated for -30°C to +40°C without derating. From +40°C to +55°C, the output current must be derated linearly. At -30°C, the drive starts and operates normally — the electronics are rated for cold start without preheating. For outdoor installations, the UL Type 4X rating ensures protection against hose-directed water and corrosion. Note that condensation is not permitted inside the enclosure; install the drive in a position that avoids direct water pooling on connector faces.

Frequently Asked Questions

Can the G115D drive a non-Siemens motor?

Yes. While pre-engineered for SIMOGEAR 2KJ8 geared motors, the G115D operates any standard three-phase asynchronous, synchronous reluctance, or permanent-magnet synchronous motor within its current and voltage ratings. Motor parameters are entered during commissioning via the Startdrive tool or the web server module.

What is the SCCR (Short-Circuit Current Rating) of the G115D?

65 kA when protected by the specified upstream overcurrent protection device. This rating is validated under UL 61800-5-1 and enables installation in industrial power distribution systems with high available fault current.