At 4 kW (10.2 A rated, 20.4 A overload), the 6SL3520-0XA24-0AA0 brings fan-cooled FSB performance to conveyor applications where commissioning speed matters as much as steady-state output. Macro-based parameterization loads a complete drive configuration from a single selection in TIA Portal — motor data, ramp times, braking parameters, and fieldbus mapping are preset for typical conveyor duty cycles.

How does macro-based commissioning reduce startup time on multi-drive lines?

Instead of setting dozens of individual parameters per drive, the engineer selects the conveyor macro in TIA Portal or Starter — the drive auto-configures V/f or vector control mode, acceleration and deceleration ramps, overload thresholds, and PROFINET telegram mapping. For a line with twenty 4 kW drives, this replaces hours of per-drive parameter entry with a single macro push per device. The integrated LED status diagnostics provide instant field feedback — power, run, fault, and network status are visible through the enclosure window without a laptop connection.

Key specifications

The drive operates from a 3 AC 380–480 V supply (45–66 Hz) with an output frequency range of 0–550 Hz. High-overload capability delivers 200% for 3 seconds and 150% for 57 seconds. Integrated PROFINET and Ethernet IP interfaces connect directly to SIMATIC controllers. The built-in C2 RFI filter meets EN 61800-3 Category C2 conducted emission limits for industrial environments.