Product Specifications
- Brand
- Laser Photonics Corporation
- Part Number
- CANYON™
- Type
- Fiber Laser Deep Engraving System (3D)
- Series
- Canyon Series Deep Engraver
- Laser Source
- fiber, 1064 nm, CW operation, air-cooled
- Power Output
- 50-100 W configurable
- Working Area
- 483 x 483 x 254 mm (19 x 19 x 10 in)
- Enclosure
- Class 1, viewing window, exhaust and particle collection, electronics in sealed air chamber
- Software
- FiberScan C3
Product Description
Deep engraving used to mean acid tanks, masking waste and disposal liabilities, or a mechanical pantograph slowly tracing templates. Laser Photonics built the CANYON to retire both: a fiber laser at 1064 nm ablates metal with straight, smooth walls and no re-melting, replacing Nd:YAG systems as well. Power runs from 50 to 100 W in customizable configurations, and the enclosed Class 1 work area holds 483 x 483 x 254 mm - deep enough for full 3D relief on parts up to 254 mm tall.
What does a Class 1 enclosure change on the floor?
Processing is observed through a viewing window instead of safety glasses and hope. Every unit ships with exhaust and particle collection sized for deep-engraving dust, and the electronics sit in a separate, sealed air-controlled chamber so conductive metal powder never reaches a circuit board. The system is rated for 24/7 industrial cycles at 110 or 220 VAC on an 8 A circuit, with a rotary indexer available for circumferential work.
| Parameter | Value |
|---|---|
| Power output | 50-100 W fiber, 1064 nm |
| Work area | 483 x 483 x 254 mm |
| Safety | Class 1 enclosed |
| Software | FiberScan C3 |
Which applications justify the switch?
Serial numbers, UDI and UID marking, OCR coding, logos, barcodes and surface texturing on aluminum, stainless steel, titanium, brass and coated metals - plus wood, plastics and ceramics when the job calls for it. FiberScan C3 drives both 2D layouts and 3D toolpaths from one interface, which is where the acid bath and the pantograph finally leave the building.
Resources & Documentation
Laser Photonics CANYON™ Fiber Laser Deep Engraving System, 50-100 W with 483 x 483 mm Field
Product Specifications
- Brand
- Laser Photonics Corporation
- Part Number
- CANYON™
- Type
- Fiber Laser Deep Engraving System (3D)
- Series
- Canyon Series Deep Engraver
- Laser Source
- fiber, 1064 nm, CW operation, air-cooled
- Power Output
- 50-100 W configurable
- Working Area
- 483 x 483 x 254 mm (19 x 19 x 10 in)
- Enclosure
- Class 1, viewing window, exhaust and particle collection, electronics in sealed air chamber
- Software
- FiberScan C3



