12 month warranty Request a Quote Technical Support
Sign In

Product Specifications

Product Description

The SFC, manufactured under the Wallace & Tiernan brand by Evoqua Water Technologies, is a multi-parameter measuring and dosing controller for potable water, industrial process water, and swimming pool water treatment. Its universal process input accepts thermocouples (types R, S, J, T, K, L, B, N, C), 3-wire Pt100 RTDs, and DC linear signals (0/4–20 mA, 0–50 mV, 0–10 V), enabling direct connection to virtually any water quality sensor without external signal conditioning. Measurable parameters include free and total chlorine, chlorine dioxide, ozone, potassium permanganate, pH, Redox, fluoride, and conductivity — all with automatic temperature compensation.

What control strategies does the SFC support?

Three control modes are available. Single feed forward provides flow-proportional dosing where a flowmeter signal directly determines chemical injection rate. Single feedback closed-loop uses PI control to drive a measured water parameter toward a fixed or remote setpoint. The compound-loop mode combines both — flow-proportional feed forward with residual feedback trim — using an adaptive setpoint algorithm with fuzzy logic that continuously adjusts the trim contribution based on process dynamics. This is the control strategy required for drinking water chlorination where both contact-time flow pacing and residual compliance must be satisfied simultaneously. For motor-driven dosing pumps and actuated valves, the SFC supports positioner linearization with 2, 3, 6, or 11 calibration points.

How does it integrate with plant-wide SCADA?

An RS485 interface with support for a process monitoring system and OPC server connects the SFC to higher-level SCADA, allowing remote setpoint adjustment, measured-value readout, and alarm monitoring from a central control room. An RS232 port is reserved for firmware updates. The CAN sensor/actuator bus enables daisy-chaining of compatible digital sensors and actuators on a single cable, reducing wiring compared to point-to-point analog loops. An SD card provides 30-day trend display for two measured variables with on-screen graphing on the 128 × 64 pixel backlit LCD.

Evoqua
Compare

Water Treatment Dosing Controller with Compound-Loop Control & Adaptive Setpoint | Evoqua SFC

Multi-Parameter Dosing via CAN Bus
MPN/Series: SFC

Product Specifications

Brand
Evoqua Water Technologies
Part Number
SFC
Product Type
Universal Process Controller
Control Modes
Feed Forward, Feedback PI, Compound Loop with Adaptive Setpoint Trim
Universal Input
TC (R/S/J/T/K/L/B/N/C), RTD Pt100, DC mA/mV/V
Analog Output
0/4–20 mA, ≤500 Ω, <0.5% FS, Galvanically Isolated
Measured Parameters
Free/Total Cl₂, ClO₂, O₃, pH, Redox, Fluoride, Conductivity
Interfaces
RS485 (SCADA/OPC), RS232 (Firmware), CAN Sensor/Actuator Bus
Protection Rating
IP66
Water Treatment Dosing Controller with Compound-Loop Control & Adaptive Setpoint | Evoqua SFC
×