Product Specifications
- Brand
- Abbey Electronic Controls
- Part Number
- ZAX27A
- Product Type
- TRIAC Power Controller
- Load Rating
- 12–300V AC, 1A RMS continuous, 300W max
- Control Modes
- Phase-angle or burst-fire, hot-switchable
- Supply
- 5V DC, 30mA max
- Control Input
- 0–1V or 0–5V
- Isolation
- 5kV (low-voltage to mains)
- Protection
- 90°C thermal shutdown, overcurrent, output inhibit
- Dimensions
- 28 × 28 × 21 mm
Product Description
The Abbey ZAX27A is a self-contained TRIAC power controller in a 28 × 28 × 21 mm module, designed for direct microprocessor interfacing to regulate AC power to resistive heating loads. It integrates the TRIAC, control logic, isolation, and protection in a single compact package — eliminating the need for external drive circuitry.
How does the dual-mode control work?
A single logic-level pin selects between phase-angle control and burst-fire (zero-crossing) operation, allowing hot-switching during operation without interrupting output. In phase-angle mode, conduction angle varies continuously for smooth power adjustment — ideal for applications requiring fine resolution. In burst-fire mode, complete mains cycles are gated through in packets, minimizing EMI and suiting slower thermal processes. The control input accepts 0–1V or 0–5V signals, making it directly compatible with microcontroller DAC outputs, PWM-filtered signals, or external potentiometers.
What closed-loop control features are on board?
The ZAX27A includes an uncommitted operational amplifier configurable as an error amplifier or comparator. This allows closed-loop temperature or power regulation by comparing a setpoint voltage against a feedback signal from a thermocouple amplifier, thermistor divider, or current-sense resistor — all without an external PID controller. Soft-start limits inrush current at power-on, and an output inhibit input allows external enable/disable gating.
What protection is integrated?
All low-voltage pins are galvanically isolated from the mains by 5kV — meeting Class II insulation requirements. Internal thermal shutdown triggers at 90°C die temperature and auto-resets at 60°C. Overcurrent protection and a 15A non-repetitive surge rating provide robustness against load faults. The module is designed for resistive loads only (heaters, ovens, dryers, heating tapes) and should not be used with inductive loads. For applications exceeding 300W, the ZAX27B variant drives external TRIACs or SCR pairs for unlimited power scaling.
Abbey ZAX27A | Compact TRIAC Power Controller, Phase-Angle or Burst-Fire, 300W
Product Specifications
- Brand
- Abbey Electronic Controls
- Part Number
- ZAX27A
- Product Type
- TRIAC Power Controller
- Load Rating
- 12–300V AC, 1A RMS continuous, 300W max
- Control Modes
- Phase-angle or burst-fire, hot-switchable
- Supply
- 5V DC, 30mA max
- Control Input
- 0–1V or 0–5V
- Isolation
- 5kV (low-voltage to mains)
- Protection
- 90°C thermal shutdown, overcurrent, output inhibit
- Dimensions
- 28 × 28 × 21 mm






