Product Specifications
- Brand
- Cheemi Technology Co., Ltd.
- Part Number
- SBWR
- Type
- Two-Wire Temperature Transmitter (DDZ-S series)
- Input
- Thermocouples K, E, J, B, S, T, N; RTD Pt100, Pt500, Pt1000 (SBWZ family)
- Output
- 4-20 mA two-wire
- Power Supply
- DC24V +/-1 V (load up to 350 ohm)
- Accuracy
- 0.2%FS (0.5%FS available)
- Measuring Range
- -200 to +1800 degC (sensor dependent)
- Transmission Distance
- up to 1000 m
- Mounting
- Sensor terminal head, DIN rail, panel
Product Description
A temperature sensor without a transmitter sends a millivolt or resistance change down a long cable, where every splice and noise source adds error. SBWR puts the conversion at the sensor: the 4-20 mA signal starts where the temperature is, and the control room reads a clean loop instead of a weak signal.
Why mount the transmitter in the sensor head at all?
Because the loop current is far more immune to cable length and interference than a raw thermocouple millivolt or a resistance change. SBWR is the thermocouple-input member of the family - SBWZ covers RTDs - and both are two-wire devices where power and signal share one pair, so a field instrument upgrade needs no extra cable. With 0.2%FS accuracy and transmission distance up to 1000 m, the transmitter suits plants where the sensor sits at the far end of a process line.
What limits the 4-20 mA loop length in practice?
The loop voltage budget. SBWR runs from DC24V +/-1V with a load capacity of about 350 ohm, so the practical distance depends on the cable gauge and the number of series devices in the loop - a long cable plus a display and a recorder in series eats into that budget. The transmitter also mounts on a DIN rail or panel when the sensor head is too small or too hot, keeping the same two-wire output for the whole installation.
Resources & Documentation
Cheemi SBWR Temperature Transmitter, Pt100/Pt500/TC to 4-20 mA
Product Specifications
- Brand
- Cheemi Technology Co., Ltd.
- Part Number
- SBWR
- Type
- Two-Wire Temperature Transmitter (DDZ-S series)
- Input
- Thermocouples K, E, J, B, S, T, N; RTD Pt100, Pt500, Pt1000 (SBWZ family)
- Output
- 4-20 mA two-wire
- Power Supply
- DC24V +/-1 V (load up to 350 ohm)
- Accuracy
- 0.2%FS (0.5%FS available)
- Measuring Range
- -200 to +1800 degC (sensor dependent)
- Transmission Distance
- up to 1000 m
- Mounting
- Sensor terminal head, DIN rail, panel







