The 0CF0 build of this 200 kW SINAMICS G120X is what a pump room looks like when the network decision has settled on Ethernet and the cable runs have stayed short: C3 filter integrated for the industrial grid, PROFINET and EtherNet/IP onboard, no DC terminals in the layout — and the full 370 A LO rating that every 2YE52 build shares.

Why does the dual-protocol port matter more on a lean build?

Because with no DC terminals and no external filter stage, the drive is deliberately minimal — and the one place that minimalism must not cost anything is monitoring flexibility. PROFINET serves the Siemens control layer; EtherNet/IP on the same port keeps a Rockwell-side SCADA or historian reading the same drive without a gateway. Both run over the plant Ethernet that the cabinet already terminates, so the lean layout does not become a lock-in.

What does the C3 class assume about the installation?

An industrial supply network with no residential connection — the second environment per EN 61800-3. Within that assumption the integrated C3 filter is complete: no external filter stage, no EMC accessories to order, emissions handled inside the 305 x 999 x 369 mm housing. The 4 DI / fail-safe DI / relay and analog I/O set rides on the standard terminal scheme, and the 200%/3 s and 150%/57 s overload figures match the whole 2YE52 family — only the ordering letters differ between the nine variants in this frame.