Product Specifications
- Brand
- Sun Firm Machinery Ind. Co., Ltd.
- Part Number
- CET series
- Type
- Heavy-Duty Flatbed CNC Lathe
- Series
- CET
- Swing
- 730-2,500 mm over bed
- Spindle Speed
- 1-1,560 rpm (range)
- Power
- 15 kW continuous, 18.5 kW peak
- Tooling
- V8 turret, hydraulic tailstock
Product Description
The Sun Firm CET is a heavy-duty horizontal flatbed CNC lathe built on a wide, hardened-and-ground bed for big, long workpieces. It is offered across a swing range of 730 to 2,500 mm and centre distances up to 12,000 mm, aimed at oil, aerospace, mould, steel and wind-power work.
Why does a flatbed hold heavy work better than a slant bed?
A slant bed sheds chips well on small parts, but a long shaft needs a wide, rigid base to resist deflection under heavy cuts. The CET spreads the load across a 460-1,120 mm bed, so a heavy roll or turbine shaft stays straight through a full-depth roughing pass where a compact slant-bed would flex and lose tolerance.
- Swing over bed 730 to 2,500 mm, centres to 12,000 mm
- Spindle bore from 105 to 560 mm for large bar or tube
- FANUC, FAGOR or SIEMENS control
- Hydraulic tailstock and 4-way bed system
Against a general-purpose lathe, the CET is sized for the part a shop otherwise cannot turn at all — the long, heavy, high-value workpieces that only a heavy-duty bed can carry.
Resources & Documentation
Sun Firm CET Heavy-Duty Flatbed CNC Lathe, 2-Axis
Product Specifications
- Brand
- Sun Firm Machinery Ind. Co., Ltd.
- Part Number
- CET series
- Type
- Heavy-Duty Flatbed CNC Lathe
- Series
- CET
- Swing
- 730-2,500 mm over bed
- Spindle Speed
- 1-1,560 rpm (range)
- Power
- 15 kW continuous, 18.5 kW peak
- Tooling
- V8 turret, hydraulic tailstock







