The Indumax CLS52 analog conductivity sensor is equipped with a stainless steel temperature sensor that is an integrated Pt100 in a heat contact nut. Intended for use in the food industry, the sensors are injection-molded and made from high-resistance PEEK, allowing them to meet the hygienic requirements of the food industry. The inductive conductivity cell contains an outside temperature sensor.

The Indumax CLS52 is intended for applications such as alkaline/acid concentration control in remaking and phase separation of product/water and product/product mixtures in pipe systems. It is insensitive to electrode contamination and polarization due to an inductive measuring principle. The sensor is suitable for exposure to continuous temperatures of up to 257°F/125°C. It can be operated at temperatures of 284°F/140°C for up to 30 minutes for sterilization purposes.

Features

• Measurement range: 0.1 to 2000mS/cm
• Process temperature: Max. 257°F/125°C (short time up to 284°F/140°C)
• Process pressure: Max. 232 psi at 194°F (Max. 16 bar at 90°C)
• Ingress protection: IP 67
• Inductive conductivity measurement principle
• ATEX certification for hazardous areas