The 6SL3520-1XK01-5AB0 is the entry point to the 1/3-phase G115D range: 1.5 kW in the compact FSA frame (216 × 129 × 380 mm), with integrated braking chopper and the same wide-voltage input stage as its larger 1XK02 siblings. At 4.1 A continuous output, this drive matches IE3/IE4 motors in the 1.1-1.5 kW range for decentralized conveyor, packaging, and material handling applications where the drive mounts on the machine — not in a cabinet.

Smallest frame, same wide-voltage flexibility

The 1XK01 retains the full 1/3-phase input capability of the 1XK02 platform in the smaller FSA enclosure. A facility can run this drive from a standard single-phase 230 V outlet (via transformer to 400 V) or from the three-phase bus — the drive configures its input stage at power-up. For OEM machine builders exporting to markets with varying site power availability, this single part number covers both scenarios without stocking separate single-phase and three-phase part numbers.

FSA installation and thermal envelope

The FSA frame is the most compact G115D enclosure, dissipating up to approximately 50 W of power loss through natural convection alone. The aluminum housing serves as both structural chassis and heatsink — no fan, no moving parts, no maintenance. At −30 °C cold start capability, the drive can be installed in unheated logistics areas and outdoor machine frames (within the IP65 enclosure rating). Integrated braking chopper with 350 Ω internal resistor handles regenerative energy from frequent deceleration cycles up to 100 W peak.