The 6SL3520-0XA60-3AB0 pairs with 0.37 kW SIMOGEAR 2KJ8 geared motors on the shortest conveyor sections — transfer points, right-angle diverters, and single-zone accumulation beds. At 1.3 A rated output (2.6 A overload), it is the smallest drive in the G115D wall-mounted family.

What kind of conveyor sections use a 0.37 kW drive?

Short belt sections under 5 m, gravity-roller-to-belt transfer points, and single-zone diverters typically use 0.37 kW motors. The integrated 350 Ω braking resistor handles the frequent start-stop cycles these sections see — accumulation zones may cycle every few seconds during peak throughput. IP65/66 protection means the drive survives the same washdown environment as the conveyor frame it is bolted to.

Key specifications

The drive operates from a 3 AC 380–480 V supply (45–66 Hz) with an output frequency range of 0–550 Hz. High-overload capability delivers 200% for 3 seconds and 150% for 57 seconds. Integrated PROFINET and Ethernet IP interfaces connect directly to SIMATIC controllers. The built-in RFI filter meets Category C2 requirements.