SIMATIC ET 200AL
SIMATIC ET 200AL is Siemens' most compact distributed I/O platform, using M8 connectors to minimize footprint for on-machine installation. The system includes 16-channel digital input and 8-channel digital output modules with 8×M12 or 4×M12 ports, all rated IP67 for direct mounting outside control cabinets. A full range of pre-assembled M8 cables supports the ecosystem: PROFINET bus cables in angled and straight configurations, 4-pole power jumpers, and 24 VDC power extension cables in lengths from 0.19 m to 15 m in PUR or PVC jacket, available in green (PROFINET) and gray (power). Screw-terminal M8 field-wireable connectors complete the system for custom wiring in space-constrained automation cells, packaging lines, and assembly stations.
Products in This Series
Click product for full specifications. Select items to request a bulk quote.
| Select | Image | Product | Key Specifications | Action |
|---|---|---|---|---|
![]() |
6ES7194-2MH02-1AA0 Siemens 6ES7194-2MH02 Straight M8 Plug-to-Socket 24VDC Power PDF | 0.19-meter 24VDC power extension with straight M8 plug to straight M8 socket. The shortest power cable in the ET 200AL range—for modules mounted immediately adjacent with barely a connector body between them. Gray PUR jacket, 4×0.50mm² unshielded conductors, IP65/IP67. | View Product | |
![]() |
6ES7194-2LH10-0AB0 Siemens 6ES7194-2LH10-0AB0 M8 Bus Cable for ET 200AL, Angled- PDF | 1-meter shielded PROFINET bus cable for SIMATIC ET 200AL distributed I/O. Two M8 angled plugs (4-pole), plug-and-socket, green PVC jacket. 2Y(ST)CY dual-shielded construction—aluminum foil plus tinned copper braid—for reliable PROFINET communication at 100 Mbps in IP65/IP67 environments. For daisy-chaining ET 200AL modules where a short, low-profile link is needed between adjacent nodes. | View Product | |
![]() |
6ES7194-2LN15-0AA0 Siemens 6ES7194-2LN15 M8 Straight Plug-to-Plug PROFINET Bus C PDF | 15-meter shielded PROFINET bus daisy-chain with straight M8 plugs at both ends. Green PVC jacket, dual-shielded (aluminum foil + tinned copper braid), IP65/IP67. The standard long-reach bus cable for ET 200AL—connect I/O blocks across cabinets or across the room with factory-tested PROFINET signal integrity. | View Product | |
![]() |
6ES7194-2LN10-1AC0 Siemens 6ES7194-2LN10 M8 Socket-to-Open-End 24VDC Power Cable PDF | 10-meter 24 V DC power cable with a pre-assembled straight M8 socket at one end and open leads at the other. Gray PVC jacket, 4 × 0.50 mm² cores, IP65/IP67. Designed for within-zone field termination—shorter than the 15-meter variant, with less voltage drop and less cable to dress when the terminal block is in the same cabinet row. | View Product | |
![]() |
6ES7194-2LH02-0AA0 ET 200AL M8 Power Jumper 4‑Pole Male/Male 0.19m, Green – PDF | ET 200AL M8 power jumper cable, 4‑pole A‑coded, male connectors both ends (straight), 0.19 m, green PVC jacket. IP65/67 sealed, suitable for cable chains (2.5 million bending cycles). Pre‑assembled for plug‑and‑play 24 V supply between adjacent ET 200AL modules. Silicone‑free for paint shop use. | View Product | |
![]() |
6ES7194-2LN15-1AC0 Siemens 6ES7194-2LN15 M8 Socket-to-Open-End 24VDC Power Cable PDF | 15-meter 24 V DC power cable with a pre-assembled straight M8 socket at one end and open leads at the other. Gray PVC jacket, 4 × 0.50 mm² cores, IP65/IP67. Designed for ET 200AL power distribution where the field end must be terminated on-site—route from the last module in a chain to a remote terminal block and cut to exact length. | View Product | |
![]() |
6ES7194-2LH03-1AB0 ET 200AL M8 Power Cable Angled M8/M8 Socket 0.3m, Gray – Si PDF | ET 200AL M8 power cable, angled M8 male to angled M8 female, 4-pole, 0.3 m, gray PVC jacket. IP65/67 sealed for 24 V DC supply, cable‑carrier rated (2.5 million cycles). Angled connectors reduce installation height in confined cabinets. Silicone‑free. | View Product | |
![]() |
6ES7194-2LH03-0AA0 ET 200AL M8 Power Jumper 4‑Pole Male/Male 0.3m, Green – S PDF | ET 200AL M8 power jumper cable, 4‑pole A‑coded, M8 male connectors both ends (straight), 0.3 m, green PVC jacket. IP65/67 when properly screwed down, suitable for cable chains (2.5 million bending cycles). Pre‑assembled for plug‑and‑play 24 V supply between ET 200AL modules with slightly wider spacing. Silicone‑free for paint shop use. | View Product | |
![]() |
6ES7141-5AH00-0BA0 Siemens 6ES7141-5AH00-0BA0 ET 200AL 16-Channel Digital Input PDF | Standard ET 200AL backplane-based digital input module with sixteen Type 3 inputs across eight M12 ports. Delivers 1.4 A encoder supply and supports safety-rated tripping up to PL d / SIL 2 — the choice for PROFINET architectures requiring functional safety. | View Product | |
![]() |
6ES7194-2MH03-1AB0 Siemens 6ES7194-2MH03 Angled M8 Plug-to-Socket 24VDC Power Ex PDF | 0.3-meter 24VDC power extension with angled M8 plug to angled M8 socket. Built for the tightest within-enclosure power jump—the 300mm length spans adjacent modules with minimal slack, and angled connectors keep the profile low enough for shallow-door cabinets. Gray PUR jacket, 4×0.50mm² unshielded. | View Product | |
![]() |
6ES7194-2LN10-1AA0 Siemens 6ES7194-2LN10 M8 Straight Plug-to-Socket 24VDC Power PDF | 10-meter 24 V DC power extension with straight M8 plug and socket, both pre-assembled. Gray PVC jacket, 4 × 0.50 mm² cores, IP65/IP67. The standard-length power extension for ET 200AL—10 meters reaches across a cabinet line-up without excess slack, and the straight connectors keep the bill of materials simple when clearance is not a constraint. | View Product | |
![]() |
6ES7194-2MH02-0AD0 Siemens 6ES7194-2MH02 M8 Socket-to-Socket PROFINET Bus Couple PDF | 0.2-meter PROFINET bus coupler with straight M8 sockets at both ends. Unlike every other ET 200AL bus cable, this one is female-to-female—designed to join two existing male-ended bus cables inline, extending a PROFINET segment without replacing installed cabling. Green PUR, dual-shielded construction. | View Product | |
![]() |
6ES7194-2MH03-1AA0 Siemens 6ES7194-2MH03 Straight M8 Plug-to-Socket 24VDC Power PDF | 0.3-meter 24VDC power extension with straight M8 plug to straight M8 socket. Bridges adjacent modules with zero excess cable—ideal for clean, high-density within-enclosure power distribution. Straight connectors for fast mating; gray PUR jacket with 4×0.50mm² unshielded conductors. | View Product |
Need Help Finding the Right Part?
Our team of automation experts is ready to assist you with product selection, pricing, and technical specifications.













